Carbondesign RS2 lower door trims

[Dima ABY]

Dont go down mate.You MUST finish it.And you will have your money back plus earn money.There are a lot of forum members interested and outside the forum I am sure a lot of peaple too.Be positive

[aronmatic2]

I have some good news. I received a good write up, with usefull photos.
So lets go again.

[cardcrash]

Yay!!

[riche164]

Aron you do some great work you can't scrap this project this far in it shouldn't be down to one man weather you continue or not you have a good thing please keep it going there's a lot of men depending on you ( including me ) all the best hope to see the final product soon

[Mcstiff]

I have some good news. I received a good write up, with usefull photos.
So lets go again.

[MAICON]

[A80Avant]

Too many beers will get Aron drunk and delay the product. Leave him alone!

[aronmatic2]

Too many beers will get Aron drunk and delay the product. Leave him alone!

[Jiri]

Hey aron, How does the works going? :-)

[couperr20v]

Hi Aron
I will have a paintable set as soon as you get up and running!

[Karlis]

Did not have patience and finally ended up buying a new OEM set for 800 eur. By the way - very difficult to locate nowadays. Got 3 pieces from various channels including Audi and last piece from Audi Tradition (recently new inventory came in).

Must say, the OEM part is total cr*p. The quality is terrible. My paintshop specialist thought it is not an OEM part, but I have original invoices from Audi, so the parts are original, besides I got them from verios and all-official sources. When you look at RS2 press pics, you can observe that these parts are imperfect by design. And 90% used RS2 for sale have them twisted. So I will be staying on the list and still want the carbon version, because OEMs are expensive but poorly put together.

There is definitely market for better-than-oem replacement.

[razo]

We desperately need the lower door trims

[aronmatic2]

Sorry guys, i was quiet in the past few months. I have a very hard communication with a forum member about the final set trying.
I made 2 prototype with different angle, sent him to try. I asked to send back the good piceces(make the final molding from them) from each sides. He sent back only half set very hard(5 months).
I dont understand this situation. I offered a set free and pay all cost of shipping.

Now i have to focus some new bussiness, so i cant put more time to this. I let my guys work on them and finish, if they can. I am very dissapointed about this old forum member. Lets see, how my guys works alone. I thrust my guys, they knows everything about composite technologies, i hope they will finish it very soon. Can be the easyest way to buy a rs2, but i dont want to invest any more money to this.

[jubjub]

Sorry guys, i was quiet in the past few months. I have a very hard communication with a forum member about the final set trying.
I made 2 prototype with different angle, sent him to try. I asked to send back the good piceces(make the final molding from them) from each sides. He sent back only half set very hard(5 months).
I dont understand this situation. I offered a set free and pay all cost of shipping.

Now i have to focus some new bussiness, so i cant put more time to this. I let my guys work on them and finish, if they can. I am very dissapointed about this old forum member. Lets see, how my guys works alone. I thrust my guys, they knows everything about composite technologies, i hope they will finish it very soon. Can be the easyest way to buy a rs2, but i dont want to invest any more money to this.

Sorry to hear this

Name and shame them....

[aronmatic2]

Sorry to hear this

Name and shame them....

Nothing changes, if i name him.