034 92.8 & 100mm crank

[newt]

Wall thickness depends on what you're doing with the motor, there's guys that have done NA 83.5 stuff for years. On a big power turbo motor, probably not the best idea.

[Jamo]

Exactly, not uncommon at all.

83.5mm pistons, more details please as over 83mm the piston walls are considered too small so I'd love to see details of the 2.8 conversion with 83.5 pistons

[jade]

Exactly, not uncommon at all.

Please can you tell us more about what is involved in the 2.8 conversion, just to set the record straight

[Billman]

I've just checked and this product looks very much like a certain one made by a swedish company so i'm wondering if it's being imported rather than made at 034

is there any link for this Jamo?

[newt]

83.5 pistons then

Exactly, not uncommon at all.

[newt]

What a load of crap ! “Far superior to the stock cast units available” . well the stock cranks are not cast they are forged and very strong, Audi tested them to 1400hp before encountering problems so IMO this should be taken with a pinch of salt.

"cast stock based units available" There are stock 'based' cast unit available in the aftermarket, not 'stock' units.

[Jamo]

I've just checked and this product looks very much like a certain one made by a swedish company so i'm wondering if it's being imported rather than made at 034

[Error404]

Sounds like 034, they seem to make all there products sound better than they are

[driftin jo]

What a load of crap ! “Far superior to the stock cast units available” . well the stock cranks are not cast they are forged and very strong, Audi tested them to 1400hp before encountering problems so IMO this should be taken with a pinch of salt.

[Rocco]

83.5 pistons then

[jade]

Yep agreed I can only get it to 2706cc. Its a bit much to round that upto 2.8 litres!

Sounds like 034, they seem to make all there products sound better than they are

[G60Rallye]

Yep agreed I can only get it to 2706cc. Its a bit much to round that upto 2.8 litres!

[Jamo]

Having done some calculations I don't know where 2.8 litres come from on the site, think it's a typo as I work out 2705cc with the 100mm crank and 83mm pistons

[G60Rallye]

Looks a stunning bit of kit! Would be interested to hear from anybody who decides to use one! 2.8 litre sounds insane!

[Nuno Cristiano]

Good news!

And balacing crank?