Audi 80 2.8 Quattro Break or Sell

[pasbogdan]

you read my thoughts....tempted to convert my old 80 as the rear subframe mounts are there! im thinking stripped, caged, bucket seat, lots of noise, lots of speed...

Interesting thing about rear subframe mounts.When i looked for a 80 quattro for my b2coupe conversion to quattro i saw that non quattro 80 did not have the mounts at the rear for the subframe..

[andy10v]

Interesting thing about rear subframe mounts.When i looked for a 80 quattro for my b2coupe conversion to quattro i saw that non quattro 80 did not have the mounts at the rear for the subframe..

What year of 80q?

[pasbogdan]

It was a b4,do not know year.Also a b3 did not have the mountings for subframe.I had to buy a b4 cq for all pieces(rear flor/inner arches with mountings,tunel,tranny etc)
Curious...

[niall4313]

Interesting thing about rear subframe mounts.When i looked for a 80 quattro for my b2coupe conversion to quattro i saw that non quattro 80 did not have the mounts at the rear for the subframe..

Have a look at a thread by a forum member here 'Nimz' I think, he did a quattro conversion just with a little bit of welding for subframe mounts, seems like straightforward job Im looking into getting it done on my tdi saloon to make a competetion replica

[andy10v]

Nitec's quattro conversion;

http://www.s2forum.com/forum/showthread.php?t=49903

Quattro swap starts on page 4

http://www.s2forum.com/forum/showthread.php?t=49903&page=4

[niall4313]

Nitec's quattro conversion;

http://www.s2forum.com/forum/showthread.php?t=49903

Quattro swap starts on page 4

http://www.s2forum.com/forum/showthr...t=49903&page=4

Nitec is the guy I was thinking of

[willg54]

the mounts are the on the b4 saloon chassis anyway! tucked under chassis sealant and a bung!

[niall4313]

the mounts are the on the b4 saloon chassis anyway! tucked under chassis sealant and a bung!

You sure about that? I hadn't checked yet

[willg54]

pretty sure! there was a thread on audifans about all this, and it was discovered they were there. Its the same chassis, would cost audi more to not have them!

[pasbogdan]

Will ceck at a b4 coupe fwd and on monday on a saloon/avant.Also in etk the rear longitudinal members are different from q to fwd

[willg54]

get a screw driver out and you might be surprised!

[andy10v]

Coupes are different, they are basically B3 running gear, quattro and fwd totally different rear floorpan.

B4 saloon/estate should be easily quattroable based on Nitec/Audifans thread.

[niall4313]

Anybody have a link to that discussion on audifans, or do I need to be a member there?

[pasbogdan]

Coupes are different, they are basically B3 running gear, quattro and fwd totally different rear floorpan.

B4 saloon/estate should be easily quattroable based on Nitec/Audifans thread.

That is also what i saw.The right longitudinal member is shorter.
Will ceck one b4 again

[campbellWS]

13 people want parts