Announcement

Collapse
No announcement yet.

New urs6 build

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • New urs6 build

    Dear all,

    Because i was hiding parts for a while and my wife noticed that the attic became a warehouse i had to hide them somewhere and , where is the best place to hide them than on a car

    So, my build looks like this : Woessner pistons, fcp rods, machined head, turbobandit tb60 billet turbo, wagner t3 EM, 1200cc injectors, custom clutch ( 7A flywheel, sachs 707 plate and nissan patrol disc ) , DQT gearbox , garage made fmic, pnp vems and a few more things I forgot for the moment.




  • #2
    What power are you hoping to have at the end off your build fella. We will need lots off photos to keep us in the loop .

    Comment


    • #3
      The power should be somewhere arround 500hp, as i am going with stock AAN cams. Also i have some issues with the injectors that i think are too big combined with RON100 and possibly not having a good idle.

      Will post more pictures these days.

      Comment


      • #4
        We moved the pin of the brake pedal with 2,3 cm higher to be on a straight angle with the booster. Hopefully it will hold ...

        Comment


        • #5
          Originally posted by marius555 View Post
          The power should be somewhere arround 500hp, as i am going with stock AAN cams.

          Will post more pictures these days.
          AAN cam will be a significant limiting factor. I recently tried various cam options on billet rs2 turbo and the difference in engine power delivery is very big. 7A cams with an adjustable cam wheel are the way to go

          Comment


          • #6
            Originally posted by marius555 View Post
            The power should be somewhere arround 500hp, as i am going with stock AAN cams. Also i have some issues with the injectors that i think are too big combined with RON100 and possibly not having a good idle.

            Will post more pictures these days.
            With similar setup i ended up around 480hp and 600nm from engine (Tb60, wagner t3, aan cams, pump gas)

            Comment


            • #7
              Very cool , anymore photos of the exterior
              sigpic
              Cab 2.3E
              90q
              URS6

              Comment

              Working...
              X