A6 2.5 TDI(5 cylinder) k24 7000?

[Majorcina]

Before i put the engine in the car i was thinking abouth using my k24 7000
Will it have any benefit?
Maybe someone done something similar or done maping for this set up?Will injector get maxed out and the fuel pump?
P.S. its 140hp stock engine

[Monkeymagic]

I'm not a turbo expert but I would say it would be of zero benefit

[Kieron20V]

I think there was a guy on here who did it with his, but the name escapes me!

[Majorcina]

I was trying on search but all i found was for 2.4 tdi engine

[Kieron20V]

http://www.s2forum.com/forum/showthread.php?t=53043

[UrS4boy]

Before i put the engine in the car i was thinking abouth using my k24 7000. Will it have any benefit?

The AEL turbo is very different than the 3B/AAN/ABY K24-7000 turbo, i.e. it has an integral wastegate, not separate like the K24-7000:

[AndyP]

You can fit the K24 comp wheel and housing on the K14 CHRA, I looked at doing this on mine. Decided against it in the end as it wasn't going to do what I was looking for, which is more bottom end, like a VNT turbo.

Should give you a solid 200bhp turbo if that's that you're looking for

[ralleyquattro]

A friend in Poland swapped a 10vt manifold with AUdi wastegate and K24.. he is very happy with it.

[UrS4boy]

Clearance? Clearance? We dohn need no steenkin' Clearance

[goodall]

Worth doing as will give you a slightly higher flowing compressor wheel which with the lager hotside, 6cm rather 3cm will give more flow potential. Just need figure out a waste gate.