so, the part number of the disk is 43708. the number of pressure plate i will know tommorow. i just talked to my friends at www.groundzero.lt , and they said they had no problems with clutchnet sofar.
sla
sla
-
sla
'91 s2 3b, 305hp, 480 nm.
www.4plius.com -
I think not. I have launched at least 100 times above 6k without any troubles (the weakes part is pressure bearing). I have Sachs performace pressure plate and regular disk. I haven't draged with any car that has beaten me for the first 10 meters. You can actually feel all 4 wheels grip after launching the clutch pedal - no slipping at all.
PS. I wouldn't suggest better clutch if you suffer for neck problems
Originally posted by s2driverukDoug, i think my rear diff will go pop with a 6k rpm launch
also the clutch is slipping at the moment so not sure I am going to be able to wait that long....Comment
-
David, the paddle clutch is just referring to the design of the friction plate. It has 6 paddles, sometimes called 'pucks' that act as the friction material. In the case of the EZ-Lock Pro it's six paddles constructed from a sintered copper alloy.Originally posted by s2driveruk91 Modded 3B
14 A6 Avant Black EditionComment
-
sla, thanks for the informationOriginally posted by sla_s2
91 Modded 3B
14 A6 Avant Black EditionComment
-
ok thats good, was going to say, definate no to a paddle
sigpic
1992 3b S2 CoupeComment
-
Im definately interested tom.
martinComment
-
Originally posted by kaaperdajaI think not. I have launched at least 100 times above 6k without any troubles (the weakes part is pressure bearing). I have Sachs performace pressure plate and regular disk. I haven't draged with any car that has beaten me for the first 10 meters. You can actually feel all 4 wheels grip after launching the clutch pedal - no slipping at all.
PS. I wouldn't suggest better clutch if you suffer for neck problems
More to do with the fact my diff is probably on its last legs
sigpic
1992 3b S2 CoupeComment
-
Put me down for one too. Thanks,des.Comment
-
Tom, how long would it take to get these clutches if we get 10 people interested?
Im just wondering what to use if we cant get them in time for the garage meet.Comment
-
Aelred Smith (ex dialynx) is sending a clutch to them to look at. It might take a few weeks before they are ready to be shipped. Im keepng my eye on this as my clutch is getting week.
On the looks of it, the Presicion Clutch cover plates have been removed from this idea, as they have proven to be very very hard to balance. So Aelred and I have decided that the best route is to buy one of Clutchnet's own cover plates. This way if there are any problems its only down on one manufacturer, and blame cannot be passed from either company.sigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nmComment
-
the clutch pressureplate was it for a 3b flyweel or a doublemass one (ADY) ?? how mutch Nm and HP' s they may get....Comment
-
This will be for 3B cars at the moment. They should be able to take about 600bhp and still be driveable on the road.sigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nmComment
-
Have you heard any news about these yet tom?
Do you reckon we could get one for the garage meet?
martinComment
-
I sent two type of clutches by air mail on Jan. 11th, Until friday night last week (28th) Clutchnet had not recieved them. I was going to ring last night but forgot about it. Will do it tonight. Hope they did not get lost. Will keep you posted.AelredComment
-
Ok thanks aelred.
martinComment
Comment