Group Buy Interest - Billet Crankcase Breather - 054 103 129

[M_GORDON]

Hi.
Do U have any pics of the Brether, mounted?

[AndyP]

Hi.
Do U have any pics of the Brether, mounted?

Probabley not as they don't exist and most likley never will.

Paid for in full in NOVEMBER 2015 and still no confirmed delivery date, seriously taking the piss now.

[mac2226]

Hi Andy I've spoke with issam today,he's a good guy just got side tracked with other projects and is now sorting things out

[M_GORDON]

Probabley not as they don't exist and most likley never will.

Paid for in full in NOVEMBER 2015 and still no confirmed delivery date, seriously taking the piss now.

[martinjs]

Hi Andy I've spoke with issam today,he's a good guy just got side tracked with other projects and is now sorting things out

Got sidetracked? Is that what caused a batch to be scrapped going off his last post?
Does he know what he is doing?

[mac2226]

Got sidetracked? Is that what caused a batch to be scrapped going off his last post?
Does he know what he is doing?

what your saying as I've also payed. Feel same martinjs but I did speak to him yesterday about Fluidampr and I'm sure he will be back on forum with a update on these billet breathers

[a4kquattro]

I dont believe he's said exactly when the project would be completed. relax guys, Issam will come through. I've done tens of thousands of dollars worth of business with the guy over the years.

[Wizard-of-OD]

Got sidetracked? Is that what caused a batch to be scrapped going off his last post?
Does he know what he is doing?

No I don't know what I am doing.
Seriously that was an out of place comment especially on a well respected forum like this. I would expect that on Audizine & Audiworld , not S2forum where we all know each other.
Martin that was a cheap shot and you know it.... you don't like the long lead time then I will happily facilitate whoever you paid.

I don't make crap (proof in throttle cams) and I don't sell crap. This has taken extremely long and trust me when I say it is not intentional. Everyone will be satisfied when it is completed. It should not be too long now.

Hi.
Do U have any pics of the Brether, mounted?

I will get them onto the block as well as possibly making an installation video.

[Wizard-of-OD]

I dont believe he's said exactly when the project would be completed. relax guys, Issam will come through. I've done tens of thousands of dollars worth of business with the guy over the years.

Thank You Marc

[martinjs]

I haven't ordered one.

[Wizard-of-OD]

I haven't ordered one.

So I am guessing you are waiting ?

[Wizard-of-OD]

UPDATE : JULY 5TH 2016:

Ignoring Martin for now , this is Revision 4 of the base and REV01 of the puck.
On the CNC tonight is Revision 5 of the base and REV02 of the puck.

I tried to make a base specific to certain codes but that proved to be pointless so what we have done is add a 0.005" step so basically you give the base a decent dead blow until it stops. I would almost recommend epoxy of some sort considering the OEM is a tan can and basically deforms to the block. Of course if you are satisfied with your hammering abilities then you won't need epoxy.

It goes without saying that I am humbly sorry for the insane wait time on this but anyone who has ever purchased a machine part from me will know that I don't ship garbage. Id rather you be pissed @ the wait time than be pissed at the product.

The puck itself is seeing a revision as we are stepping down to an AN-12 . AN-12 has more common sizes available and even has an AN-12 to 1.25" barb (in stock).
The Meziere unit has the same size hex on it as the AN-16's on the AN-12's which means we wont have to make any changes to that operation (which is good).

https://www.summitracing.com/int/parts/mez-wa12125u/overview/

I will have return to AN-16's (or use them) depending on what Meziere says.

I will also be making the arrow more pronounced so as to ensure what direction is up

Without further explanation here is the pictures of what it looks likes. You can get a decent amount of steel wool in there to help with the catch can.

This is with a slight tap with the rubber hammer:


The puck installed which has an o-ring on the puck face that meets the block plate . (can use alot of steel wool in there)


With the fitting installed:


and one more picture for good measure:


As of right now this is the list:

1. Wizard-of-OD - PAID
2. Wizard-of-OD - PAID
3. Wizard-of-OD - PAID
4. Daniel Terre - PAID
5. JSOL - PAID
6. Jelle.. - PAID
7. EFI EXPRESS - PAID
8. EFI EXPRESS - PAID
9. EFI EXPRESS - PAID
10. EFI EXPRESS - PAID
11. EFI EXPRESS - PAID
12. Henkjan - PAID
13. Henkjan - PAID
14. Henkjan - PAID
15. Henkjan - PAID
16. Henkjan - PAID
17. Henkjan - PAID
18. Jukkis - PAID
19. Tonks4x4 - PAID
20. Tonks4x4 - PAID
21. Tonks4x4 - PAID
22. Tonks4x4 - PAID
23. Tonks4x4 - PAID
24. fbatwork - PAID
25. fbatwork - PAID
26. Cypres83 - PAID
27. orignalS60 - PAID

I have 50 being made over the course of the next 2 days. Whoever asked or wanted an additional 1 , now is the time as I won't be making more of these for a LONG time.

[ringbearer]

Well done sir!

[mac2226]

UPDATE : JULY 5TH 2016:

Ignoring Martin for now , this is Revision 4 of the base and REV01 of the puck.
On the CNC tonight is Revision 5 of the base and REV02 of the puck.

I tried to make a base specific to certain codes but that proved to be pointless so what we have done is add a 0.005" step so basically you give the base a decent dead blow until it stops. I would almost recommend epoxy of some sort considering the OEM is a tan can and basically deforms to the block. Of course if you are satisfied with your hammering abilities then you won't need epoxy.

It goes without saying that I am humbly sorry for the insane wait time on this but anyone who has ever purchased a machine part from me will know that I don't ship garbage. Id rather you be pissed @ the wait time than be pissed at the product.

The puck itself is seeing a revision as we are stepping down to an AN-12 . AN-12 has more common sizes available and even has an AN-12 to 1.25" barb (in stock).
The Meziere unit has the same size hex on it as the AN-16's on the AN-12's which means we wont have to make any changes to that operation (which is good).

https://www.summitracing.com/int/parts/mez-wa12125u/overview/

I will have return to AN-16's (or use them) depending on what Meziere says.

I will also be making the arrow more pronounced so as to ensure what direction is up

Without further explanation here is the pictures of what it looks likes. You can get a decent amount of steel wool in there to help with the catch can.

This is with a slight tap with the rubber hammer:


The puck installed which has an o-ring on the puck face that meets the block plate . (can use alot of steel wool in there)


With the fitting installed:


and one more picture for good measure:


As of right now this is the list:


I have 50 being made over the course of the next 2 days. Whoever asked or wanted an additional 1 , now is the time as I won't be making more of these for a LONG time.

Hi issam could I have another please

[JuizeR]

How to order?