Group buy custom made strong drive shafts

[Biturbo]

This is how looks front drive shafts when full ready

[kinaputt]

Im in. Are you going to make a list with names? How are we going to pay?

[Rocco]

Can't be made stronger CV's?

[maxiice]

Can't be made stronger CV's?

Biturbo is making shafts, not CV joints it thats what you are asking

He can make any shaft so you can change from 90mm CV or 100mm CV to the biggest 108mm CV.

Also if you need the best of best you get him to make a shaft for the older 80q CV that uses a locking nut instead of the locking bolt. The threaded holt in the CV weakens it.

[Rocco]

Biturbo is making shafts, not CV joints it thats what you are asking

He can make any shaft so you can change from 90mm CV or 100mm CV to the biggest 108mm CV.

Also if you need the best of best you get him to make a shaft for the older 80q CV that uses a locking nut instead of the locking bolt. The threaded holt in the CV weakens it.

I understood it,
Only wanted to know if they could make something stronger for CV's

Thanks!

[jsws3]

I have had 2 sets of these and they are beasts comperd to stock Audi shafts .

[Sonic]

I had a feel of your shaft the other day and it was seriously impressive.

[kinaputt]

How many splines are there on the 108mm inner CV and how many splines is it on the outer CV with nut?
Can anyone post partnumbers?

[jsws3]

I had a feel of your shaft the other day and it was seriously impressive.

I had a feel of your hard wear today and I was very imprest !

[Sonic]

I had a feel of your hard wear today and I was very imprest !

Thank you kind sir, you're welcome to cop a feel anytime.

Your blower was unsheathed which means I could appreciate the giant cog standing proud in all its splendid magnificence.

[macspring]

I had a feel of your shaft the other day and it was seriously impressive.

Sonic, is there something you're not telling us ? !

[maxiice]

Partnumber ar hard to find on the real old stuff. but i belive this one from 200q is quite strong in the aftermarket category
https://www.rexbo.eu/metzger/joint-k...07203?c=100071

But there are also race shops that have better stuff....

For inner joint its a lot easyer, just go for ur s4/s6 pn 431498103CX
https://www.rexbo.eu/search?q=431498103CX

[Biturbo]

I had a feel of your shaft the other day and it was seriously impressive.

Sonic I'm waiting your call,that set off rear ones is waiting to be collected

[Biturbo]

Partnumber ar hard to find on the real old stuff. but i belive this one from 200q is quite strong in the aftermarket category
https://www.rexbo.eu/metzger/joint-k...07203?c=100071

But there are also race shops that have better stuff....

For inner joint its a lot easyer, just go for ur s4/s6 pn 431498103CX
https://www.rexbo.eu/search?q=431498103CX

Yes this is correct.With inner is easy all s2 had them from factory so you can use original no any modification needed.
Outer that 200q is strongest ones.And is car for drag race go for them,is just street with lots of power original s2 fronts will be ok.
I can get only shafts not cv joints

[Biturbo]

Im in. Are you going to make a list with names? How are we going to pay?

This time I just do buy pm.I have few already asking so making list my self and send order.Will ask some small deposit that people not change they minds.
So is any one need some strong shafts just pm me and I will take order.
Just now I'm very busy finishing my car so my time to answer pm can take longer but I try answer as soon I get to internet.