Audi 80 B4 2.6 quattro > R32(vr6)

[Jaswan]

It won't fit under the hood with the intake manifold... Also the first coil pack will also hit the hood. . . .

I have "R8" coils on mine so the plug connects from the side.

You will also need to change the sump for a longitudinal design.... and modify the subframe to mount the engine lower (that is still to only make enough room for the cam cover minus the intake manifold)

Regards

Jase.

[Greg_S]

Interesting project, have fun

[TurboS]

Cool

How far along are you now?

Right now have all parts what i need to put engine in and start making engine arms. But i need to collect maxxecu race money and after that i can start swaping it in.

[TurboS]

Thanks for good words!

[peyderpey]

Welcome and good luck.by the way, good video

[LSG]

Hello and . Good luck with the build.

[80Comp]

Cool

How far along are you now?

[Vorsprung durch Technik]

Very interesting project, looking forward to updates.

[TurboS]

Hello!

This is my Audi 80 b4 quattro. I saved this car from going to spare parts. Its 2.6 v6 engine, the first idea was to use the S4 2.2 AAN engine and make a replica s2 sedan. This idea soon passed and i did sell my S4 engine. I started looking for a 2.8 vr6 24v engine, but by chance I managed to get a 3.2 vr6 from Audi TT. It goes longitudinal, clutch setup im using is custom adapter what i made and Audi single mass flywheel from 5cyl engine, where i made new bolt patern. Clutch will be 3b sre clutch. Gearbox 01e from c4 s4.
At the moment, I am fixing the car to get it road legal before winter.

Also im making videos of this build. Go check out https://youtu.be/RQoR1fNthLk