Nice 2.2 Engine bays - Pictures Please

Collapse
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts

  • quattro-nick
    replied
    Originally posted by varia
    i think that was also used on 15 audi models in the usa (4B3611021)
    Rs4 b7 have diameter 27mm.other 25 mm or smaller
    I believe all 8pots calipers have diameter 27mm mastercilinder

    Leave a comment:


  • taren86
    replied
    Originally posted by UrS4boy
    All it takes is money:

    http://www.efiexpress.com/catalog/pr...products_id=66

    Some here (Norbitron??) makes good harnesses (I hear).



    it's a bit cheaper

    Leave a comment:


  • varia
    replied
    Originally posted by quattro-nick
    I also use the rs4 mastercilinder ☺
    i think that was also used on 15 audi models in the usa (4B3611021)

    Leave a comment:


  • quattro-nick
    replied
    I also use the rs4 mastercilinder ☺

    Leave a comment:


  • varia
    replied
    Originally posted by quattro-nick
    thanks alex,the rs4 b7 brake booster is realy great,especially with the big brakes in the front,strong brakepower with a little force on the brake pedal and a small pedal distance!
    not to rain on your parade, but that rs4 b7 booster is same as many audi from that era, a4, a6, a8. it can be source for $60 (the booster and MC)

    Leave a comment:


  • quattro-nick
    replied
    Originally posted by Error404
    Looks great nick. How do you find the dual brake booster?
    thanks alex,the rs4 b7 brake booster is realy great,especially with the big brakes in the front,strong brakepower with a little force on the brake pedal and a small pedal distance!

    Leave a comment:


  • neal1981
    replied
    How hard would it be for somebody to make & fit one for me?

    Leave a comment:


  • UrS4boy
    replied
    Originally posted by neal1981
    Thats something that will never happen then! its an impossibility.
    All it takes is money:

    http://www.efiexpress.com/catalog/pr...products_id=66

    Some here (Norbitron??) makes good harnesses (I hear).

    Leave a comment:


  • neal1981
    replied
    Thats something that will never happen then! its an impossibility.

    Leave a comment:


  • Error404
    replied
    Looks great nick. How do you find the dual brake booster?

    Leave a comment:


  • neal1981
    replied
    Thats an impossibility for me i'm afraid but thanks for the information.

    Does it have any benefits?

    Leave a comment:


  • UrS4boy
    replied
    Originally posted by neal1981
    Coils off a V8 on a 5 Cylinder Engine is that correct or have i got the wrong end of the stick?
    Correct. The trick is the coil packs need to replace an AAN, ABY or ADU ignition system. You need to make or buy a harness to make it work.

    Leave a comment:


  • quattro-nick
    replied
    Originally posted by neal1981
    Coils off a V8 on a 5 Cylinder Engine is that correct or have i got the wrong end of the stick?

    they are all tfsi coils and the same so the number of cylinders is not a factor
    you have black ones and red ones

    Leave a comment:


  • Thuppu
    replied
    You can see the coil part number in urs4boy's post. Easy to order from your Audi dealer or from ebay etc... You also need a proper harness for the coils, there is a few sales adds on here from where you can get it.

    Nick, looking good!

    Leave a comment:


  • neal1981
    replied
    I already have mate i'll give it one more shot then if they don't sell i'll either put them on ebay or use them to get the wood burner going.

    Leave a comment:

Working...