Hello, maybe you guys rememmber my project Audi Coupe b4 TDI Quattro.
Here's the link:
http://www.s2forum.com/forum/showthread.php?t=63567
Had an accident. Didnt wanted to continue the project after it.
So here's my new storyline:
Bought Audi Avant 80 2.6 V6 Quattro.
This car had really awfull story. The last owner removed rear differential, installed audi C4 FWD gearbox and made it FWD. (idiot) He did it for the name of few liter economy wich comes with 1 axle drive.
Anyway the specifications:
Specifikācijas:
Audi 80 Avant Quattro
1994. yr.
Color: Dark Blue
Full Climate
ABS,
Front Electric Windows,
Heated, electric mirrors,
Dark interior,
Future plans:
Get it running. After that will start doing some exterior upgrades.
First, RS2 bumper in front,
RS2 bumper in back,
Elipsoids,
RS2 foglights/blinkers.
RS2 reflector.
Black Hella/Seima backlights.
Some interiour upgrades in future aswell. Like RS2/S2 carbon interiour, S-Line Steering wheel, some good looking leather/half leather seats. Tinted Rear windows etc. But all that - in far far future.
For starters: This car was in really bad condition, everything was made with crooked fingers.
Here's a picture of my ex car (to the right), and my new car(to the right)
Basiclly i'm gonna swap my Ex. 1.9 TDI engine with about 200 HP, my ex. 5gear petrol/diesel hybrid gearbox etc. to Avant.
So after a while, the V6 was out and sold right after:
Took my Ex. Coupes TDI wires out, nice and smoothly.
Did some paintjobs to the front Semiframe, since it was off.
Bought B3 Hella dark backlights. Gonna find b4 black ones but those are kind'a rare.
Bought Rear Differential from 2.8 Sedan Q Audi 80 and Cardan.
Repainted my G60:
Restored theese aswell.
This is how they look: And yes, by the way - all of my project i'm doing without any garage. I'm tuning it outside
Did some Welding jobs for TDI engine mounts:
Measured, to get the right position of the mounts:
And here it goes - Gearbox is in, engine mounts done:
Restored theese things aswell:
Bought everything for the rear differential.
Installed rear diff in theese conditions with a help of friend:
Changed Oil in Differential aswell and here it goes: Rear diff installed:
Did some wiring aswell. Great job. Everything went well.
Besides the regular Tdi wiring, did some extra. Installed VDO (voltmeter, oil pressure and t°), and I did had an autocheck before in this car, installed it aswell.
Repainted everything here:
Had to make my flywheel straight:
And here goes the engine:
And first start aswell:
http://www.youtube.com/watch?v=nP7bE...layer_embedded
To be continue!
Here's the link:
http://www.s2forum.com/forum/showthread.php?t=63567
Had an accident. Didnt wanted to continue the project after it.
So here's my new storyline:
Bought Audi Avant 80 2.6 V6 Quattro.
This car had really awfull story. The last owner removed rear differential, installed audi C4 FWD gearbox and made it FWD. (idiot) He did it for the name of few liter economy wich comes with 1 axle drive.
Anyway the specifications:
Specifikācijas:
Audi 80 Avant Quattro
1994. yr.
Color: Dark Blue
Full Climate
ABS,
Front Electric Windows,
Heated, electric mirrors,
Dark interior,
Future plans:
Get it running. After that will start doing some exterior upgrades.
First, RS2 bumper in front,
RS2 bumper in back,
Elipsoids,
RS2 foglights/blinkers.
RS2 reflector.
Black Hella/Seima backlights.
Some interiour upgrades in future aswell. Like RS2/S2 carbon interiour, S-Line Steering wheel, some good looking leather/half leather seats. Tinted Rear windows etc. But all that - in far far future.
For starters: This car was in really bad condition, everything was made with crooked fingers.
Here's a picture of my ex car (to the right), and my new car(to the right)
Basiclly i'm gonna swap my Ex. 1.9 TDI engine with about 200 HP, my ex. 5gear petrol/diesel hybrid gearbox etc. to Avant.
So after a while, the V6 was out and sold right after:
Took my Ex. Coupes TDI wires out, nice and smoothly.
Did some paintjobs to the front Semiframe, since it was off.
Bought B3 Hella dark backlights. Gonna find b4 black ones but those are kind'a rare.
Bought Rear Differential from 2.8 Sedan Q Audi 80 and Cardan.
Repainted my G60:
Restored theese aswell.
This is how they look: And yes, by the way - all of my project i'm doing without any garage. I'm tuning it outside
Did some Welding jobs for TDI engine mounts:
Measured, to get the right position of the mounts:
And here it goes - Gearbox is in, engine mounts done:
Restored theese things aswell:
Bought everything for the rear differential.
Installed rear diff in theese conditions with a help of friend:
Changed Oil in Differential aswell and here it goes: Rear diff installed:
Did some wiring aswell. Great job. Everything went well.
Besides the regular Tdi wiring, did some extra. Installed VDO (voltmeter, oil pressure and t°), and I did had an autocheck before in this car, installed it aswell.
Repainted everything here:
Had to make my flywheel straight:
And here goes the engine:
And first start aswell:
http://www.youtube.com/watch?v=nP7bE...layer_embedded
To be continue!
Comment