Only change I am going to make to the external appearance of the s2. Pleased with end fit and look.
Announcement
Collapse
No announcement yet.
FINISHED RS2 style grill
Collapse
X
-
Originally posted by couperr20v View PostOnly change I am going to make to the external appearance of the s2. Pleased with end fit and look.
Comment
-
Originally posted by couperr20v View PostOnly change I am going to make to the external appearance of the s2. Pleased with end fit and look.
2. Don't you need a slot/hole for the bonnet's safety release?
RS2'd 93 UrS4 5 spd sedan
94 UrS4 V8 6 spd manual avant
Comment
-
How do you open the bonnet?
Comment
-
I would add some photos to explain but my computer doesn't want to do this simple task for some reason.
I bought a sheet of some 10mm x 15mm aluminium mesh which comes painted then bonded it into the original silver trim which I have painted gloss black.
At this point I fixed 6 small threaded screws one in each corner and one top and bottom in the centre. Marking the bonnet drill six holes and paint holes and bolt in grill.
I saw a picture some where of a bonnet catch that had been straightened down so I thought I would try it. Very easy and works perfect, as the bonnet pops up you can put your fingers underneath the bonnet and pull the release towards you unlatching the bonnet.
Got mesh of ebay.
Comment
-
Nice job.
Comment
-
Originally posted by couperr20v View PostI would add some photos to explain but my computer doesn't want to do this simple task for some reason.
You must have already done this in this thread so I can't see where the issue would be.RS2'd 93 UrS4 5 spd sedan
94 UrS4 V8 6 spd manual avant
Comment
Comment