FINISHED RS2 style grill

[couperr20v]

Only change I am going to make to the external appearance of the s2. Pleased with end fit and look.

[HMS-S6]

Looks good!

[couperr20v]

Cheers Rich. How did the remap go with mark?

[HMS-S6]

Haha! Very well, went up there with V power in it so was able to give it a nice amount of advance!

[Gazmitchell]

Only change I am going to make to the external appearance of the s2. Pleased with end fit and look.

Looks v good , exactly what I want to do to mine but trying to get hold of one is proving difficult, can't even fine one on Audi tradition .... And the repro ones look like they're not so well made , any tips ?

[UrS4boy]

Only change I am going to make to the external appearance of the s2. Pleased with end fit and look.

1. What material did you use to make the insert?

2. Don't you need a slot/hole for the bonnet's safety release?

[gavs20v]

Looks good , is that the kamei grille ?

Gav

[newsh]

How do you open the bonnet?

[Michael S2]

Zoom in and you can see there is a small hole with catch. Looks quite good.

[couperr20v]

I would add some photos to explain but my computer doesn't want to do this simple task for some reason.
I bought a sheet of some 10mm x 15mm aluminium mesh which comes painted then bonded it into the original silver trim which I have painted gloss black.
At this point I fixed 6 small threaded screws one in each corner and one top and bottom in the centre. Marking the bonnet drill six holes and paint holes and bolt in grill.
I saw a picture some where of a bonnet catch that had been straightened down so I thought I would try it. Very easy and works perfect, as the bonnet pops up you can put your fingers underneath the bonnet and pull the release towards you unlatching the bonnet.

Got mesh of ebay.

[newsh]

Nice job.

[UrS4boy]

Zoom in and you can see there is a small hole with catch. Looks quite good.

Must be blind. Can't see any special holes.

[UrS4boy]

I would add some photos to explain but my computer doesn't want to do this simple task for some reason.

You're using the S2 Forum "Manage Attachments" feature, right? IF so, you need to "browse" to the folder with the photo you want to attach and click on it. Then click "OPEN" to select and then "upload".

You must have already done this in this thread so I can't see where the issue would be.

[dubmanted]

This looks really good

[rxl]

I bought a mesh to see if it's close to original becouse can't see paying audi tradition for a mesh almost 100 euro. Upper one is oem

Gesendet von meinem GT-I9505 mit Tapatalk