0A3 Gearbox Conversion Kit

[Error404]

After some interest from some members I am now producing a kit to convert to a 0A3 gearbox from a B6/B7 S4 or RS4.

The kit contains all of the modified & fabricated components required:

Modified complete B6/B7 gear linkage
Gearbox mountings from S355 & fully TIG welded
Driveshaft spacer incorporating VSS trigger wheel machined from EN24T & zinc plated
VSS hall sensor bracket
Honeywell VSS hall sensor with JPT connector to match OE harness.

£550 plus shipping. Made to order with around 2 weeks lead time.
Individual components can be made available if required. Any questions, please ask

Cheers
Alex

e0aBxfi.jpg

F2pdr7S.jpg
2fqFtby.jpg

[Jonas_R]

How much HP/NM cab the 0A3 boxes handle?

[Error404]

No idea on the upper limit, but there are plenty of supercharged S4s & RS4s running 600+ reliably. The shaft spacing is larger than the 01E and the gears are larger, so in theory they can handle more torque but because the centre gear housing is alloy its probably not the case. The syncros are more fragile but the gear shift is far superior to the 01E

Since most 01Es are ****ed now, and rebuilding one properly costs ££££s so this swap is a good alternative option

HTH

[A80Avant]

Good stuff Alex

[jsws3]

No idea on the upper limit, but there are plenty of supercharged S4s & RS4s running 600+ reliably. The shaft spacing is larger than the 01E and the gears are larger, so in theory they can handle more torque but because the centre gear housing is alloy its probably not the case. The syncros are more fragile but the gear shift is far superior to the 01E

Since most 01Es are ****ed now, and rebuilding one properly costs ££££s so this swap is a good alternative option

HTH

A full set of bearing will cost you around £1200 + labour charges to build if

[Error404]

Plus syncros, maybe a couple shift hubs, seals etc. You're looking at £2.5k in parts alone, with replacing any worn gears, diffs etc.

[rxl]

i must be the fist buyer of this set.. cant wait to drive with this gearbox as moast of s2/rs2 gearboxes are dead and replacement parts for the shifter are NLA.

[Jonas_R]

Bookmarked for when my gear
box dies.

[rxl]

Received my set. High quality and a great product.

Gesendet von meinem EVA-L09 mit Tapatalk

[quattrostyle]

Great work Alex

[LSG]

Alex I must say the things you turn out always look exceptional. I think the lads are lucky your love is with the S2.Great work fella.. Kind regards Lynn.

[Error404]

Thanks guys I hope this kit helps people to make their S2s even better

i have some more stuff in the pipeline too

[gavs20v]

I'm not in the position to do this conversion atm however just wanted to say well done and thanks. It's one thing being innovative for your own requirements but something else offering it to the masses
All the best
Gav

[Rusty]

Great work

[Henkjan]

Bookmarked for when my gear
box dies.

+1

Thanks Alex!