Announcement

Collapse
No announcement yet.

Breaking S2 Coupe

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Breaking S2 Coupe

    With a very heavy heart i have to break this coupe. Upon re installing the running gear after having everything powder coated and discovering all but two of the sub frame captive nut housings are held together by just the underseal. I had to draw a line under my time gone into this and what i would have in hand at the end of the day. Sadly being sat had not been kind to this car. Pictures will be uploaded next week.

    The engine was rebuilt. And then it came to me and it was re done again as i was not happy with its history.

    So there is:

    Fully rebuilt 3B engine and turbo, rings and bearings, honed and faces skimmed. All parts bar the cylinder head have been soda blasted and washed. New gaskets every where, all ancillaries included. All new belts, one of my crank pulleys and a spec clutch which personally i would swap for a sachs. £3500

    Freshly black powder coated hub carriers with M14 bolt holes. Brand new bearings pressed in, hubs have studs in, rear carriers have been modified to take a rear disc splash gaurd as the S2 coupe one is NLA SOLD

    Brand new ABS sensors to match above hubs SOLD

    White line adjustable rear anti roll bar £100

    RS2 front anti roll bar £300

    Brand new front drop links £30

    17" avus wheels, freshly refurbed in anthracite, with brand new Toyo Proxes 225/45/17, tyres still have stickers on £750 THESE ARE MINT

    Lowering springs brand new full set £175

    CAC exhaust rear box and centre box £250

    Cast wish bones freshly powder coated black, brand new febi bilstien ball joints and brand new powerflex bushes SOLD

    Pressed rear wish bones, powder coated black with brand new ball joints and brand new powerflex bushes SOLD

    Porsche front calipers with nice anodised aluminum brackets £340

    Uprights, M14 all powder coated black as new £120

    Prop shaft, GKN CV joints, no centre bearing, brand new motorsport boots powder coated black SOLD

    4x drive shafts, all powder coated and rebuilt with GKN motorsport CV grease and new boots SOLD

    Front sub frame fresh black powder coat SOLD

    Rear diff, stripped and shimmed, Mounts powder coated black, polly mount brand new £350

    Sachs clutch slave cylinder brand new SOLD
    All other parts please PM





    Last edited by terrybullwon; 2 December 2021, 09:11.
    Chef

  • #2
    Sorry to hear this. Very sad for you but good timing for me.
    Front Porsche calipers please if they fit under standard wheels
    PM incoming
    Nothelle S2 Avant
    Black Ur project
    Ocianic Ur project gone
    S2 Coupe project gone
    Urs6 plus project gone

    Comment


    • #3
      PM coming your way for; shafts, prop, wishbones and ABS sensors.

      Thanks
      Stuart


      Sent from my iPhone using Tapatalk
      Last edited by SE_30; 15 October 2021, 23:07.
      Stuart
      B2 90 quattro with boost

      Comment


      • #4
        What’s the condition of the rear subframe ?

        Comment


        • #5
          Originally posted by simons2 View Post
          What’s the condition of the rear subframe ?
          The one from it was a pile of rust. I do have one, although i had to repair that to.

          Pm recived Stuart!
          Chef

          Comment


          • #6
            Is the prop a 5 speed or 6?

            Comment


            • #7
              Originally posted by terrybullwon View Post
              White line adjustable rear anti roll bar £100
              Hi Terry,
              Whats the condition of this bar?
              Regards

              Comment


              • #8
                How are the centre door and body mouldings James?

                S2 Coupe 3B Project


                Ur quattro restoration

                S2 Avant

                Boost is the new rock and roll!
                sigpic

                Comment


                • #9
                  Originally posted by newsh View Post
                  How are the centre door and body mouldings James?
                  Hammered ****.
                  Chef

                  Comment


                  • #10
                    Originally posted by newsh View Post
                    How are the centre door and body mouldings James?
                    Sorry did you mean the plastic middle section rather than the rubber door trim at the bottom?
                    Chef

                    Comment


                    • #11
                      Originally posted by terrybullwon View Post

                      Sorry did you mean the plastic middle section rather than the rubber door trim at the bottom?
                      Yes the plastic middle pieces

                      S2 Coupe 3B Project


                      Ur quattro restoration

                      S2 Avant

                      Boost is the new rock and roll!
                      sigpic

                      Comment


                      • #12
                        Hi, I'm looking for all the air ducting going from the headlight to the airbox. Also interested in a non leaking oil cooler.
                        can you help in any way?

                        Comment


                        • #13
                          Sorry to read you are having to throw the towel in chef…what a nightmare!

                          which springs?
                          sigpic

                          1992 3b S2 Coupe

                          Comment


                          • #14
                            Drivers wing if its rust free

                            Comment


                            • #15
                              Could I get a price for the headlights please James?

                              Regards
                              Jase.

                              Comment

                              Working...
                              X