3 bar (300 kpa) MAP sensors

[prj]

Selling 300kPa Motorola MAP sensors.
A such sensor is needed if you want to convert your AAN or ABY ECU into an ADU ECU.

These sensors are a fully compatible replacement for the Bosch 300kPa sensor normally found in the ADU ECU.
The voltage output is exactly the same as the Bosch at 5 volts supply (0.2V 20kPa and 0.8V 300kPA). The pinout is the same (3 pins connected), I will also provide you with all required data if needed.

They are much smaller than the Bosch sensor, so you will not have any issues of fitting them inside of the ECU:


Prices, shipping included in price:
1 Sensor - 25 EUR
3 Sensors - 69 EUR (23 EUR / each)
5 Sensors - 100 EUR (20 EUR / each)

Payment can be using wire transfer (IBAN/SWIFT) or via PayPal.

Contact me via PM or alternatively post in this thread.

EDIT: I attached a guide and specifications for the sensor.

[nemilosu]

pm sent

[turbo s4]

hi
how mutch boost can you run with it ,
greets
tom

[prj]

It is 300kpa, so upto 2 bar boost, just like RS2.
But you need the correct chips and a resistor change or a remap, if you are going to use this in an AAN/ABY ECU. In the 3B ecu just a remap...

[Jonas_R]

Why do you need the resistor if you use it in AAN/ABY ECU?

[prj]

Why do you need the resistor if you use it in AAN/ABY ECU?

You don't need it, but without it you can't use ADU software.
If you custom map it, then it works either way...

Please ask this in PM, it is not related to my sale thread.

[nemilosu]

i think is sold

[prj]

As interest was higher than expected, I promptly made an information guide about the sensor, it is in the top post.
If you spot any errors, please let me know.

[prj]

i think is sold

I have many sensors - that's why I can offer them cheaply. If you buy a single sensor from an online store then the shipping will already be like 25 euros, not to mention the sensor is 2x more expensive, than when buying many.

[nemilosu]

I have many sensors - that's why I can offer them cheaply. If you buy a single sensor from an online store then the shipping will already be like 25 euros, not to mention the sensor is 2x more expensive, than when buying many.

i understand.
so the corect post is :
one sensor sold

[prj]

Okay, I see

[Sonic]

Is this meant to be a direct replacement for the VMAP-D?

[prj]

Is this meant to be a direct replacement for the VMAP-D?

I don't really know what the VMAP uses inside. Paul has speculated, that perhaps it has the same MPXH sensor, just the 400 kpa variant, which is then rescaled.
If you used VMAP in place of a 3 bar Bosch sensor, then this will work perfectly fine.

[prj]

4 sensors shipped

[prj]

Just to clarify (as I have been getting questions), I have a lot more of these... I had to order a pretty large batch to be able to sell them this cheap.