Maybe the doors Jeffry requires could be made of composites, so there wouldn't be the need to find an original door.
building a sportquattro
Collapse
X
-
-
I think the rally drivers, Mikkola, Rohrl, etc, asked for the steeper windscreen angle as the ur quattro screen reflected too much of the instruments at night.Comment
-
yes thats true and the replica has more top end speed because it has a bit better aerodynamics with the flatter screen .Comment
-
Your probably laughing about it because it tumbled over?Originally posted by caterpillarstand a 2 door 80 in norway.and i know where... 8-)) they have another vindsield frame angel

Or is it in ok condition?
lemme know please.
I'm still thinking about the windshield. Is the dialynx car equiped with an upright windshield? I really want to have the authentic look on the outside. Inside is probably not going to be original. More like a rollcage and a seat
But that is only going to happen if I can find that 2-door 80.
The engine is offcourse going to be similar or better then the S2. But for now the car itself is priority.
This saturday I'm going to have a look at 2 Urquattro's both in restauration condition. Will let you guys know what happens.
Cheers and thanks!!Comment
-
Can you treat us with some more pics of your SQOriginally posted by volcano rsyes thats true and the replica has more top end speed because it has a bit better aerodynamics with the flatter screen .
ThanksComment
-
Jeffer,
The Dialynx car has the upright screen like the 80, it looks so much better than the sport conversions with the flat screen like the URS2 Avant......fully loaded :rock: :bow: Slipper Wagons Rule !!!!!Comment
-
-
if you look on the forum last week under quattro pics you'll see mine (the red one).only few pics at the moment because the car is not ready yet and i'm still working on it . but there are some pics of the engine bay and one of the car . see what you think ?.Comment
-
Originally posted by Audi Parts GuruJeffer,
The Dialynx car has the upright screen like the 80, it looks so much better than the sport conversions with the flat screen like the UR
If i remember correctly only the more expensive Dialynx conversions have the upright screen which they then have to install a roll cage with as the roof is made of fibre glass.
These guys:
have made a conversion using a 90 saloon with a coupe rear end grafted on to give the authentic steep screen look with a proper roof.Comment
-
it does look better but finding bits and the hassel to modify A pillars is not an easy job and i certainly wouldn't do it or have it done unless they use a jig to allign it up properly . its a death trap if not done properly.Comment
-
The Sport quattro used the front end of stock 4 door Audi 80. If you use a 2 door front end, the doors will be almost as long as the Coupe ones, albeit with a more upright frame.Originally posted by JefferThanks guys. I understood that I need an audi 80 2 door front end for the correct upright window. Now thats hard to find. And yes please provide me with as much info on parts as possible
jeffer at highoctane.nl
cheers
Original Sport quattro had poor rear access due to the short front doors. But then again, there was no rear seating either, unless you had no legs,
and it was a fire breathing brute, not meant to be practical.
Never show a fool a half built house.
Never underestimate the power of stupid people in large groups.
Life is like a **** sandwich
The more bread you have, the less **** you eatComment
-
From a 4 door.Originally posted by Audi_CQWhat about a 4 door? Should be possible to cut right after/on top off the a-pillars and weld on the roof from the coupe there?
Are the SQ doors from a 2 door sedan or a 4 door?
Cheers,
Roger
Never show a fool a half built house.
Never underestimate the power of stupid people in large groups.
Life is like a **** sandwich
The more bread you have, the less **** you eatComment
-
The SPQ is identical to the 2-door Audi 80 sedan from A-pillar to behind the B-pillar.Originally posted by Audi_CQWhat about a 4 door? Should be possible to cut right after/on top off the a-pillars and weld on the roof from the coupe there?
Are the SQ doors from a 2 door sedan or a 4 door?
Cheers,
Roger
The SPQ differences (on the roof) are:
The roof is wider than the Coupé versions.
The A-pillar is more upright
The B-pillar is more upright
The C-pillar is wider at the top
That means if you want to build a exact copy, you have some work to do.
Check this sketches...
Best regards
..::mrBOND::..
När det gäller bilar och andra fordon så finns det hur mycket information som helst där ute på nätet och denna sajten har fyra ben att stå på: Bilar, MC, mopeder och nöjesfordon. Med nöjesfordon menar jag allt från en hoverboard till en fallskärm, typ allt som man kan åka med/på och som är kul … Fortsätt läsa ”Bilar och tillbehör”Comment
-
Sorry.. but thats not correct...Originally posted by ~DeltaFrom a 4 door.
Best regards
..::mrBOND::..
När det gäller bilar och andra fordon så finns det hur mycket information som helst där ute på nätet och denna sajten har fyra ben att stå på: Bilar, MC, mopeder och nöjesfordon. Med nöjesfordon menar jag allt från en hoverboard till en fallskärm, typ allt som man kan åka med/på och som är kul … Fortsätt läsa ”Bilar och tillbehör”Comment
-
Check Zsolt's well build SPQ copy with correct A and B-pillars.
This year he also rebuilt the C-pillar for the 3th time.
The dashboard is brandnew original SPQ from Audi Germany.
Best regards
..::mrBOND::..
När det gäller bilar och andra fordon så finns det hur mycket information som helst där ute på nätet och denna sajten har fyra ben att stå på: Bilar, MC, mopeder och nöjesfordon. Med nöjesfordon menar jag allt från en hoverboard till en fallskärm, typ allt som man kan åka med/på och som är kul … Fortsätt läsa ”Bilar och tillbehör”Comment
Comment