LarsSkogstad - Audi S2 (3B) 1991 Coupe

[larsaskogstad]

Where is it from?

[larsaskogstad]

Coilovers fitted, trying out the calipers

[SteveH]

Sweet

[newsh]

Very pretty

[larsaskogstad]

Too bad the chassi doesnt look lile this will post more pics later.

[larsaskogstad]

Fitted everything except calipers on the rear, concidering a brake upgrade or buy new cheap ones. Going to mount Stack turbopressure gauge when I have some more time on my hands

[larsaskogstad]

One wherl bearing was pressed wrong so had to "start over". Fitted brake hoses, etc, only missing abs sensors and some fresh DOT4 then the front is done waiting for gaskets for turbo etc

[larsaskogstad]

IMG_20201114_144317.jpg

[SteveH]

Great job. Hope you enjoy driving it

[larsaskogstad]

I hope so too hehe

[larsaskogstad]

IMG_20201121_170954.jpg IMG_20201121_160146.jpg IMG_20201121_170945.jpg IMG_20201121_210627.jpg IMG_20201121_160141.jpg IMG_20201121_170958.jpg

Been a busy little bee today.
Fitted everything together now, not everything is 100% secured but want to see if everything is in order when I start the engine.

Fitted DO88 hoses all around, Magnecor KV85, F5DP0R plugs, new distributor, Small Bosch rotorcap with a mod.
Added extra hose on the intercooler to the intercooler-piping-thingy

Just missing gaskets on the wastegate flexi pipe and it's ready to fire it up.

Thinking about getting a air filter box, going to do an overhaul to the engine and considering a paint job in spring time. we'll see
Now it's PC-nerd time

[vonbeck]

great stuff keep up the good work and lots of pictures, we love pictures

[larsaskogstad]

More pictures will show up later hehe. I agree pictures is the best.

[Reimond]

You should route those plug wires under throttle body

[larsaskogstad]

You should route those plug wires under throttle body

Not long enough. Or maybe.