Nice little easy and cheap fix today. OEM clip not tight enough and power steering fluid leaking out for what looks like a long time.
Announcement
Collapse
No announcement yet.
Another S2 ABY - 1996
Collapse
X
-
Gave the new brakes a bleed whilst I’m waiting for the correct water pump to arrive. 314mm discs on the front with Porsche 996 callipers and 296mm discs on the rear.
These coupled with the coil overs, custom top mounts etc should handle and stop really well when it’s back on the road.
- 1 like
Comment
-
Interested to hear your thoughts on these coilovers I had a set made many years ago, I could never get the right balance, they would either bottom out over potholes or on heavier weighted springs were too firm ( lively in the wet). I had bilstein b6 or b8 shocks all round.
There were no off the shelf coilover kits around at the time so I reverted back to original set up with h&r springs and bilstein
Comment
-
This is how tight it was. Thought for a moment I was going to have to get the spare sump out of the shed.
Old oil dropped and new quantum 5W-40 in.
Also flushed the system and topped up with 5 litres of G12.
Car started and just the one leak around the banjo on the feed into the filter…..petrol everywhere ?♂️.Attached Files
- 1 like
Comment
-
Really depends on condition. A1 condition with low owners and a good service history could be nudging £20k.
We are in a bit of a recession mind. Cost of living and high mortgage rates means not as much spare money about for weekend toys. Might take a while to sell. It's going to be worth getting the rusty bit and any other paint sorted before you sell.
Cars and Classics seems to be the best place to advertise atm.Nothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
Comment
-
Originally posted by Tractor Dave View PostReally depends on condition. A1 condition with low owners and a good service history could be nudging £20k.
We are in a bit of a recession mind. Cost of living and high mortgage rates means not as much spare money about for weekend toys. Might take a while to sell. It's going to be worth getting the rusty bit and any other paint sorted before you sell.
Cars and Classics seems to be the best place to advertise atm.
Bodywork wise, there's the blister on the drivers wing, some door mouldings and a dint in the NS sill. TBH I don't want to spend any more money on it and as a personal preference I would prefer to buy and see the bodywork before it needs paint.
I'll try an advert and see where we get to.
Comment
Comment