My 3B Coupé Project.

[merlin's S4]

Is that a standard ABY cam pulley that you're using Stu?

[4WheelDrifter]

I'm still not getting much time for this project, work is still busy, too busy.

When I do get time for the S2, it seems to involve measuring making brackets and other uninteresting bits and pieces. It's very time consuming, and gives hardly any show. I know others with custom projects know what I'm talking about.

An example is the head mounted hall sender for the front cam pulley. It's not just getting the position right, it's making the covers fit around it.




Then the cambelt back cover needed trimming.



Once I got it so I was happy with how it fitted the trimmed edges needed repainting. It's frustrating waiting for paint to dry when you just want to get things bolted on.
Now I'm working on a solution for the front cover, as the dish of the ABY cam pulley fouls on it.

Thanks to Jamil (volcano rs) I got a nice new lower cambelt pulley. The woodruff key just needed a little filing where it sits against the damper.




Here are my secret specification cams with a new chain.




All timed up and the camblet is on. Many thanks to DJones for the loan of his flywheel locking tool. What a beautifully hand crafted thing that is, and very useful.



I took the manifolds back off to make access to things a little easier, so i someways it looks like I have gone backwards. But putting parts on only to take them off again to modify something seems to have become normal here.

Trying to work out what part of the looms went over/under which hoses is a bit of a headache.

[DJ-ROY]

It looks great in that engine bay

[s2_bo]

Well done that man!!!!

[terrybullwon]

Stu looks great

Seems i am lacking........!

Best get my **** into gear.

Cheers Terry

[Sonic]

Glad to hear youve got the clutch sorted then stu, and nice IM

Let me know when you're free and we can sort something out - wouldnt mind taking a few days off to come down the the south west anyway

[4WheelDrifter]

A few weeks a go I managed to get some time and an assistant to bleed the clutch, only to find the pedal didn't return from the floor. After pumping the pedal a few times fluid started to drip from the bell housing.
Later I took the clutch slave cylinder out to find the pushrod had popped out of the end of the cylinder.

Today I took the engine out yet again to find out what was going on. And, well, I'm not sure really.
I measured everything up. Release bearing to bell housing face, and back to the clutch springs. I checked that with the old 5 speed set up that came out of the car, and it was the same. Checked again the 3B vs ABY slave cylinders, again the same apart from the manufacturer and part number.
So in the end I put it all back together and bled the clutch again. This time it was fine.

With that job done I got on with putting a few bits and pieces in to the engine bay.
It's good to see it taking shape.



I could do with getting Sonic down here, as my engine bay needs a good clean.

[Acidburn]

S8?? What did I miss?

same here

I know getting s8's is hard but buying the car just to get them

[AndyP]

S8?? What did I miss?

[s2_bo]

I like your attention to detail Stu its gonna be awesome when finished.
When are we turning your S8 in to a track whore then?

[4WheelDrifter]

As ever, thanks for the support guys.
I'm certainly taking my time over this one. I have plenty of other cars to keep me amused, but they can't replace the S2. I still look forward to driving it again.

I got the clutch from the US last summer. The S3 needed a new clutch after GTI, and with £1=$2 it was a no-brainer. The original one I got from Aelred, but I'm sure he's stopped dealing with Clutchnet since.

[Acidburn]

.......been a while since I heard that game mentioned

[Jamo]

This project = Duke Nukem Forever......

Hehe computer gamers with get that

[Acidburn]

Glad you've got some more done on this mate, looking forward to seeing some of the projects on the road this year. Doubt mine will be as i'm in no rush to finish it tbh. Just want to take my time with it atm.

[Sonic]

Awesome

Glad youve got further along with it mate