My 3B Coupe project - Total rebuild

[Greg_S]

Shame you sold it, you had it a long time. What's next?

It also shows how far the forum has fallen, before the upgrade years ago if you posted this in the thread you would have had a lot of replies, now the sites lucky to see a couple a day.

it is a shame, unfortunately the likes of Facebook and instagram for quick short posts tend to take priority.

also a shame to see you have sold yours Andy. I’m planning to get my road worthy again after a few years of life taking over

[Tom_]

From memory it was 1" for the main sides and the cross braces were 5/8", 25mm and 16mm in metric, and it was T45 tube.

Thanks and thickness 2mm?

[4WDrifter]

I’m sorry you’ve sold your car, but definitely don’t leave us here on the forum, you are too valuable a mine of info.

[AndyP]

Andy, could you share the dimension of tubing for wisbones you made? Thanks

From memory it was 1" for the main sides and the cross braces were 5/8", 25mm and 16mm in metric, and it was T45 tube.

[steverrquattro]

What a car and a great build.

You know where I live Andy and it would be great to catch up again one day.

[newsh]

Well this wasn't the next update I was expecting to post! After almost 20years of ownership I've sold the S2.

I broke my own advice and took the car off the road at the beginning of Covid to do some more upgrades and maintenance and its not turned a wheel since, it now needs a lot of time and money putting into it to get it back on the road and I've lost all enthusiasm. Its gone to a fellow forum member and all the good parts will live on in various quattro projects he has going on.

I've also go a shed load of parts that I'll be sorting through in the next few weeks, so keep your eyes peeled!

I'll be sticking around on here as ironically I'm still doing lots of machining/welding/fabrication/refurb jobs on other peoples builds.

End of an era mate,

I've actually been driving mine a bit more lately, next project is new tyres on original 16” Avus. She might end up back to stock in a year or two! (But I doubt it) lol

[Colesy]

Sorry to see that Andy. I know what it's like getting them back on the road after a period off, not a lot of fun! What's the next project/headache?

[Tom_]

Update time! Not really made any changes recently becasue, touch wood!, the car has been dead reliable and I've just been driving it But I have been making and collecting parts that I had planned to fit over the winter, but I've not actually started yet

New aluminium radiator from Vidar Skotheim


Billet steering arms from Jay at Dynamic Motorsports, to match the billet steering bracket he also supplied.


Converted the throttle body to V band to eliminate the silicone hose. I don't have many problems with boost hoses coming off, but if I do it will be that one! Still making the 70mm stainless pipework to match.


I've also re-done the breather system, the system is the same, as it works, but the parts are custom made for my engine bay.







Even bigger rear brake kit, this will retain the 43mm piston caliper I already have but uses the 300mm Phaeton disc, B5 RS4 hub and carrier




And finally I wanted new stronger wishbones on the rear, but not wanting to splash out on Sport quattro ones, I decided to make my own, using at standard bottom ball joint and Powerflex black series bushes.
This is the jig I made


Trial fitment




The finished article






Now I just need to find time to fit all this!

Andy, could you share the dimension of tubing for wisbones you made? Thanks

[david1980]

Shame you sold it, you had it a long time. What's next?

It also shows how far the forum has fallen, before the upgrade years ago if you posted this in the thread you would have had a lot of replies, now the sites lucky to see a couple a day.

[AndyP]

Well this wasn't the next update I was expecting to post! After almost 20years of ownership I've sold the S2.

I broke my own advice and took the car off the road at the beginning of Covid to do some more upgrades and maintenance and its not turned a wheel since, it now needs a lot of time and money putting into it to get it back on the road and I've lost all enthusiasm. Its gone to a fellow forum member and all the good parts will live on in various quattro projects he has going on.

I've also go a shed load of parts that I'll be sorting through in the next few weeks, so keep your eyes peeled!

I'll be sticking around on here as ironically I'm still doing lots of machining/welding/fabrication/refurb jobs on other peoples builds.

[S2central.net]

Just managed to catch up on this thread - mighty impressive build - especially like the welding work on those many fuel & breather fittings. Hope the shares in suppliers of AN hose fittings works out for you - wow !

[Nuvo]

Yip.

[AndyP]

Can everybody else see all the pictures on this thread again? I can, so I'm wondering if Photobucket have turned on 3rd party linking again.

[newsh]

Tidy!

[AndyP]

Started to re-upload all the pictures, I'll do a page at a time when ever I get chance

Did some work on the interior today, I've had some wood trims that I've wrapped in 3M carbon wrap.