Story about RS2 (LV). Hope to hit x00 whp

[Carfreak]

Nice project!!

were did u buy the guage holders ??

[aRtiS]

Nice project!!

were did u buy the guage holders ??

http://audis2fast.de/web1/index.php?option=com_content&view=article&id=24&Itemid=85

[aRtiS]

new radio is coming..

[aRtiS]

some update from DBR


from plastic to metal - custom made



from 034motorsport.com:

street density


street density - original - old one



coolant adapter made from metal


short shift

[PaulJ]

Engine mounts from 034

Be careful with fitting of these engine mounts as there is about 8mm difference in height, I fitted these and it caused engine to sit too high at front, ended up having to put 10mm spacers in them to sit engine as low as possible due to reverse inlet hitting the bonnet,

Car looks good, I went with HR coilovers and it looks like rear springs are loosing their rating as keep having to lift up the rear and now running out of travel (coil bound)

Cheers Paul

[hermanio]

this might be helpful ?

http://cgi.ebay.fr/Audi-80-B4-Blende...item1c2510cb75

[aRtiS]

Be careful with fitting of these engine mounts as there is about 8mm difference in height, I fitted these and it caused engine to sit too high at front, ended up having to put 10mm spacers in them to sit engine as low as possible due to reverse inlet hitting the bonnet,

Car looks good, I went with HR coilovers and it looks like rear springs are loosing their rating as keep having to lift up the rear and now running out of travel (coil bound)

Cheers Paul

Thanks for useful information
It' s worth considering about this matter

[Jamo]

Yep a lot of people have had issue with those mounts, I went with bambridge versions in the end

[aRtiS]

this might be helpful ?

http://cgi.ebay.fr/Audi-80-B4-Blende...item1c2510cb75

Thanks for the link
It would be good..but "vavona" 5ME looks different from "nussbaum"

[Greg_S]

Where did you get your parts for doing your springs

[aRtiS]

Where did you get your parts for doing your springs

You mean gaskets between springs made from aluminum?
They are custom-made - he in my town
Quality - I'm satisfied

Regards!

[ChrisAudi80]

Your suspension and brakes set up looks fantastic Artis.

That RS2 was good buy.

[aRtiS]

Your suspension and brakes set up looks fantastic Artis.

That RS2 was good buy.

Thanks

To be honest.. This particular car is lucky because I’ve chosen to buy this one exactly. The target was to rebuilt classic, rear Audi sports car, to make it in perfect condition: from outside, inside and under bonnet. I’ll get it to be done.

In regard to CF bonnet, obviously shipping costs to LV, custom duties make this bargain almost impossible. I have to say, that one local guy with good experience is gonna make CF bonnet with SQ vents for good price.

Sorry for inconvenience

[aRtiS]

Some Shifter Bushing Linkage Upgrade (from www.034motorsport.com)

[aRtiS]

Hallo !

Got to know - order partition net for Audi B4 Avant from dealer is not available any more

Is is possible to obtain it somewhere used?

8A9861691

Thanks in advance

Artis