AAN into Ur quattro, 400-450 Bhp Target

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • diesel des
    replied
    The map shows a clear improvement in surge over the gt2871. It will be less likely to surge that that. I have little to no surge issues on the 2871. Overlay the two maps, the 56 trim 71 and the new 67 and you will see. Also the 67 has the anti surge housing so you should be able to run off the left of the map slightly without getting into dangerous surge.

    Leave a comment:


  • A80Avant
    replied
    my 3076 with 0.63ar with a billet wheel is slightly surging on 5th and 6th if i go WOT from 2500rpm at about 3000rpm when i already have 1.8-1.9bar. I already have a ported head, so i would assume that any smaller turbine from a garrett would be more prominent to surge.

    I havent seen the wheel diameters, of the 2867, but if they are closer to the 2871, and being billet it scares me!

    Leave a comment:


  • Jamo
    replied
    I agree still be worried by surge though

    Leave a comment:


  • diesel des
    replied
    The 2876r is a very miss matched turbo with the compressor being oversized for the turbine. The 71 is better, but the new 67 should be about perfect.

    Leave a comment:


  • Jamo
    replied
    Whatever dude the post wasn't for you

    Leave a comment:


  • diesel des
    replied
    Yea map gives better surge margin than the 71r so should allow better spool. I wonder if atp would sell me the wheel and comp housing to upgrade my 2871r...

    Leave a comment:


  • DJones
    replied
    STOP.........

    Its a New Year, starting to sound like a bunch of women. I can sit in my kitchen and talk to my Mrs for comments like this....

    Leave a comment:


  • prj
    replied
    Originally posted by Jamo
    Yeah read above quote to which I was responding
    lol, 3 pages back to your actual post.
    Yeah, maybe a good idea to use the quote function next time...

    Leave a comment:


  • Jamo
    replied

    Not many people have used the GT2876R and I was wondering why not..
    Yeah read above quote to which I was responding

    Leave a comment:


  • prj
    replied
    Originally posted by Jamo
    2876 has been used on at least 4 forum cars with plots
    It used to be called 25/40 iirc
    Pekkas and aromatic2 both had around 400-450 search their posts
    Except it is a GT2867 in this case, not a GT2876.

    Leave a comment:


  • A80Avant
    replied
    If that is the case then it may surge more than the 2871 as the billet wheel being lighter will work faster

    sent using Android

    Leave a comment:


  • URquattroGus
    replied
    Originally posted by Jamo
    I know that
    Gt and gtx makes no real difference gtx is billet you'll find the turbo will perform the same with extended bhp range due to garretts design of the gtx range
    Do not dismiss the gt results
    If you look at the compressor and turbine sizes whilst taking into account trim too, its more like a GT2871R plus a bit.

    Leave a comment:


  • Jamo
    replied
    I know that
    Gt and gtx makes no real difference gtx is billet you'll find the turbo will perform the same with extended bhp range due to garretts design of the gtx range
    Do not dismiss the gt results

    Leave a comment:


  • A80Avant
    replied
    its a GTX turbo Jamo, not the GT.

    Leave a comment:


  • Jamo
    replied
    2876 has been used on at least 4 forum cars with plots
    It used to be called 25/40 iirc
    Pekkas and aromatic2 both had around 400-450 search their posts

    Leave a comment:

Working...