S2 400-450hp

[porkkis]

1.turbonetics GT-K 450 A/R.63 with T3 flags

Hopefully you haven't bought this yet. Your engine will be limited to about 350hp due to excessive exhaust pressure. I know because I had a turbonetics with the same turbine. What a waste of money.

[GazzaG60]

i have a 0.63 stage 5 on mine. that must be one tight 063

[GazzaG60]

if truth be known there aint a lot thats not chinese in some shape or form.

heres hoping for the forced currency re-evaluation of china to bring back balance and more importantly quality.

when were all at the chinese labour game it becomes a cost only initiative. good job they are running low on labour.

[porkkis]

Actually it was the KKK #8 version by turbonetcs and #10 did not help. I'd say there is a problem with the F1-57 wheel.

[Nik0las]

No I bought it and it's on the car. This is the first time that I heard about such thing. The person that I bought it from told me that it's make more then 2.5 bost without any problem, he didn't mention anything about big exhaust pressure. Are you sure about that? Besides it's not the KKK flag version.

This is the turbine:

http://www.phantasmusa.com/turboneticsgtk.html

[porkkis]

It can't be ruled out that the cause was the kkk housing but the whole thing was very odd. This has been proven in 3 different cars with the same kind of turbo.

Let's hope your setup will be better

[A80Avant]

its interesting how it does not really say the turbine impeller sizes. The compressor side appears to be somewhat similar to a 3076R size

[Nik0las]

The compressor side appears to be somewhat similar to a 3076R size

It's not similar, it's same! Turbonetics use Garret technology to make their turbos, only the the hot side propeller is different then 3076