My 95 S2 Avant Project. LZ5T Coolness

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • geryS2
    replied
    Nice job ! i wish i had the time to that on mine

    Leave a comment:


  • quattrostyle
    replied
    I didn't know they could be had that cheap. When I had the allignment done the mechanic used an induction heater to free up the tie rod ends, worked a threat

    Leave a comment:


  • irishs2
    replied
    It would work better as the diameter is smaller, just wind the coil to a smaller diameter. This item was about £7 on Banggood.com

    Leave a comment:


  • dhali7376
    replied
    Good idea with the induction heater. I wonder if that would work on corroded brake caliper bleed nippels ?

    Leave a comment:


  • Error404
    replied
    Thanks pal

    Leave a comment:


  • stocious
    replied
    Great stuff Eric

    Leave a comment:


  • irishs2
    replied
    Cheers

    I followed these instructions

    Leave a comment:


  • Error404
    replied
    Good to see you back in action Eric
    How do you remove the glass from the mirror? One of mine no longer heats and I'd like to replace the innards

    Leave a comment:


  • Nuvo
    replied
    Yay! It's great to see you're back on the scene and always with innovative solutions to problems.

    Leave a comment:


  • david1980
    replied
    Attention to detail is amazing

    Leave a comment:


  • irishs2
    replied
    Its been a long time since my last real update, so I am gona ease back into it and start with a small job.

    Mirrors:

    My mirrors where in good enough condition before the respray but the bases suffered from corrosion inside the rubber, making it bumpy in appearance.



    I bought a spare set from the forum a long long time ago, and the bases were in good condition. Unfortunately the bolt attaching the mirrors to the bases
    were seized solid. After pondering on what to do for a long time I decided I had to uses the destructive method of freeing the bases. This meant cutting off the
    old covers and cracking the alloy mirror support so I could get good purchase on the bolt.


    After failing with the vicegrips "nut lathe", I need heat but I didnt want to use a torch/flame.




    After heating it with a cheap ZVS induction heater I had success.





    All the bits


    Newly painted mirror plastics.







    Right hand side after soldering.


    Left hand side after soldering.


    Cover over the wires


    Finished mirrors with nice bases and electrics wired up.
    Last edited by irishs2; 11 July 2017, 20:47.

    Leave a comment:


  • newsh
    replied
    My 95 S2 Avant Project. LZ5T Coolness

    There should be some blue pearl loveliness in my life soon...

    [emoji51]

    Leave a comment:


  • Gimmi
    replied
    Cant wait! [emoji847]


    Sent from my iPhone using Tapatalk

    Leave a comment:


  • Geoff
    replied
    Excellent news !

    Leave a comment:


  • irishs2
    replied
    Yea, over the last week or so a few S2 things have gotten done, and I should be updating this thread again very soon

    Leave a comment:

Working...