My 95 S2 Avant Project. LZ5T Coolness

[macspring]

Are you fooling us? I'm sure you know the C4 uses a thinner dual mass flywheel andtherefore not needing the spacer?

So would it be a good mod for an ABY / ADU where one didn't want the weight / inertia of dual mass flywheel, but equally didn't want a 'crudity' of 7A type flywheel ?

Just curious, as happy with my UrS6 in its standard format.

[quattrostyle]

Great progress Ercu. Nice photos. I had only heard about (but not seen) that spacer before. Not sure why it is needed on a B4 and not on a C4.

Are you fooling us? I'm sure you know the C4 uses a thinner dual mass flywheel andtherefore not needing the spacer?

[Error404]

Different flywheel on the ABY/RS2.

[UrS4boy]

Great progress Eric. Nice photos. I had only heard about (but not seen) that spacer before. Not sure why it is needed on a B4 and not on a C4.

[irishs2]

I think so too. I have never fitted one but from watching yours and Alexs build I am copying the method.

[saltinot]

Mine too! I prefer putting them together that way than doing it in the car.

Revel in it Eric!

[irishs2]

There is still a HUGE amount of work to do but yea its exciting and I am enjoying it for sure.

[Error404]

Money shot


Getting to that stage was one of my favourite parts of the project. Hope you're enjoying it fella

[Parthon]

All going well over here.. You have been keeping your hands and brain occupied I see.... It's getting close to finished, just please keep up the great work.... And a feel a road trip coming on

[irishs2]

Looking super

Thanks

Hope you're keeping well

[irishs2]

Could have verified what's what on your Coupe ?

Check your spare Avant ?

Someone will have a photo or info on this. It is a regular obstacle to come up against.

Looking good, as ever.

Thanks.... and oh my coupe



"Dont forget the dualmass gearbox spacer". I kept saying to myself over and over.


Changed the release bearing that was included in the clutch kit.



Systems are a go


"C'mon Tars"

And with a lot of struggling


Reunited for the first time in over 2 years.

[Parthon]

Looking super

[macspring]

Could have verified what's what on your Coupe ?

Check your spare Avant ?

Someone will have a photo or info on this. It is a regular obstacle to come up against.

Looking good, as ever.

[irishs2]

Aint that the truth. It was difficult enough just taking it off the engine stand and getting it onto my makeshift stand to do the flywheel.

Another concern is to use the correct bolts in the right holes for the gearbox<>engine. I never took note of them.

[Error404]

Looksing good mate. Make sure you load up on carbs for a few days before you fit the box