project avant 450 ish

[Jamo]

It's usable, but you will have to make a custom front cross member and then custom pipe work from the IC outlet to the throttle body

Why didn't you ask Carsten before you ordered? you wanted this http://www.wagner-tuning.de/EN/products/llks2.php

[keithsw0]

well i think i said to him at the time that i was using a s4 im so surly he has sent me the wrong one

is there a volume difference

i wish he had asked me which one i wanted if i knew there were different ones i would of obviously got the right one

[Error404]

i'm sure he would exchange against the right one if its unused?

[Jamo]

well i think i said to him at the time that i was using a s4 im so surly he has sent me the wrong one

is there a volume difference

i wish he had asked me which one i wanted if i knew there were different ones i would of obviously got the right one

He sent you the right one in that case, the reverse IC is s2 / rs2 only with that kit. Unless you said you wanted the kit for use with the reverse IM you got the right IC

It's up to you to research what your buying, you can't blame Carsten IMO

I'm sure Carsten will exchange with cash adjustment so long as there is no damage to the IC, i've made him aware of the situation for you

[keithsw0]

nice one thanks its my balls up i have also emailed him all i need to know if it is the same volume and is it the mouths that is the only difference

[Jamo]

That info is on his website http://www.wagner-tuning.de/EN/products/ETs2LLK.php

The reverse one is larger, Rs2 evo = 500mm x 205mm x 85mm RS2 Reverse IC = 500mm x 220mm x 90mm

[Lupo911]

well i think i said to him at the time that i was using a s4 im so surly he has sent me the wrong one

is there a volume difference

i wish he had asked me which one i wanted if i knew there were different ones i would of obviously got the right one

i just emailed you...

look at your Mail History, you ordered straight a RS2 EVO EM and IC.

So i was under the Impression, that you know exactly what you want and need, thats also stated on your Invoice.

But not a Problem at all, read my email and let me know...

[keithsw0]

i was under that impression to but stuipidly i though there was only one my balls up thanks will read my mail

[Lupo911]

i was under that impression to but stuipidly i though there was only one my balls up thanks will read my mail

thats no Problem... you just need to read more on the Forum or on our Website...

all the dimensions and Features are stated on it... and its even in English

[Jamo]

Keith have you ordered the xmember and intake pipe as well?

[keithsw0]

ic

thanks jamo for pointing out my balls up

thanks carsten for letting me exchange coolers

sorry for bu##ering you about

at least i did not get to the fitting it stage

[keithsw0]

all stripped

the car is getting there have got the exchanged cooler thanks carsten so now have reverse inlet one

some pics of car stripped and arches rolled

windows coming out in the next few days ready for spraying

cant post pics at mo will try again in mo

[keithsw0]

pics

pics resized

[keithsw0]

all sub frames hubs are now being dropped out and going to be shout blasted and powder coated in the next few days

also has any one used koni coilovers what are they like i have koni ans hr springs at mo not sure weater to go to coilovers or not

[Acidburn]

loved the koni's on mine I had no issue's with them.

Glad you got your wing in the end

and look forward to seeing this once sprayed