My 3B to RS2 project

[newsh]

Bit more progress tonight, only started at 10 pm

[newsh]

Did you have to move the main rad at all with that inlet manifold?

No, it should go back in the same place.

[SE_30]

Great project thread here and good work, have made a few very usefull notes for my project. Keep up the good work.

[TimE-J]

Did you have to move the main rad at all with that inlet manifold?

[newsh]

The 3B rail is all hooked up and fits perfectly

Yes, I have a few belts in the garage, might be one that fits, if not its down to halfords.

[dkw_dude]

Wagner EM and Turbo back on and DP bolted up.
Wagner IM and Throttle Body on and injectors and rail and fuel lines hooked up.
Still have to fit the PS pump, hope it goes on with the IM in situ
Wiring to extend and throttle cable to sort out. The bracket near the TB for the cable looks like its at a strange angle..

Good work! I think you need a shorter PAS belt? I also bought a Wagner intake for my 3B so I'm paying attention here Will the 3B fuel rail fit the manifold?

[newsh]

how is it your thorttle body, 65 or 70mm???

Stock 3B.

[Rocco]

how is it your thorttle body, 65 or 70mm???

[newsh]

Wagner EM and Turbo back on and DP bolted up.
Wagner IM and Throttle Body on and injectors and rail and fuel lines hooked up.
Still have to fit the PS pump, hope it goes on with the IM in situ
Wiring to extend and throttle cable to sort out. The bracket near the TB for the cable looks like its at a strange angle..

[newsh]

Very nice work, I must remove my S2 Coupe ABY steering rack because has a small leak and I don't like it, with gearbox off I hope that is easy, or not?

I would think it would be pretty easy with the gearbox out, the rack could drop out downwards but some of the bolts have to be done from above and there are 2 behind the driver's side front wheel, luckily with the ABY you do not have the battery in the engine compartment.

[newsh]

Exhaust manifold is on, just waiting for some nuts and gaskets..

[Audi-Porsche Avant RS2]

Very nice work, I must remove my S2 Coupe ABY steering rack because has a small leak and I don't like it, with gearbox off I hope that is easy, or not?

[newsh]

Cheers Rocco, its good that its now going back together again

[Rocco]

good luck

[newsh]

Been gettting some parts ready

Need to order the studs and nuts for the EM..