s2 xxxhp 90% ready

[aronmatic2]

Very nice! Looks like you got pretty good traction off the line considering it was wet and you didn't change tires.

yes. it looks good from this angle, but the time is very bad

[prosty]

Impressed with your work!
The 10's will come.
Keep it up

[aronmatic2]

i changed my dahlback em to sq.
the turbo almost in same position. only one problem: THE ALMOST

[zlobo]

Hello Aron, why did you cange the em to an sport quattro em?
the sportquattro em probably have more backpressure than youre old one.

it looks great by the way.

[aronmatic2]

the dalbach tubular em does not like als and launch control. i have big ra-tta-ta.
cracked.

[aronmatic2]

the plans for holliday:

fix my bov(its stoped)
remove my cam sensor to camgear(too noisy on the original place)
change my doorboards
adjust my windows
adjust the rear door
install a good egt gauge and sensor
paint the gauges lightbulbs to red
stop the oil leak, under the camcover
install the ac kompressor+kondensator
move ps pump
i think i will do the half.

[zlobo]

the dalbach tubular em does not like als and launch control. i have big ra-tta-ta.
cracked.

ok.

[S4turbo]

Aron,
I could not find out what you have done to the head, what type of cams, valves, porting and so on.

Regards, Johan

[aronmatic2]

Aron,
I could not find out what you have done to the head, what type of cams, valves, porting and so on.

Regards, Johan

i have fully ported polished head, now with catcams camshafts, new hydralic lifters, oversized inconel exhaust valves, stronger springs, titanium retainers.
i think, this is all.

[Albert]

what cat cams do you use ?
what size are the valves ?

[aronmatic2]

what cat cams do you use ?
what size are the valves ?

0.5mm oversized
11,45 mm lift 279duration

[S4turbo]

Was that what you used on the gt30 when you got 730 nm and 512 hp?

Regards, Johan

[Faheemo]

0.5mm oversized
11,45 mm lift 279duration

Wow 279 duration sounds like a NA cam.
How much overlap has the cam got ?

[Albert]

as far as I see on catcams.be site it was this set

partnr. 1002305
duration [0.1mm+cl] 279 / 275°
duration [1.0mm+cl] 243 / 238°
maximum lift [cl=0] 11.50 / 11.45mm
lift at TDC [cl=0] 2.40 / 2.15mm

[aronmatic2]

Was that what you used on the gt30 when you got 730 nm and 512 hp?

Regards, Johan

i cant remember, when did i change. i will check.

as far as I see on catcams.be site it was this set

partnr. 1002305
duration [0.1mm+cl] 279 / 275°
duration [1.0mm+cl] 243 / 238°
maximum lift [cl=0] 11.50 / 11.45mm
lift at TDC [cl=0] 2.40 / 2.15mm

yes. your right. i have 1002305