My 3b Project

[Jamo]

Isn't the hx35 a 400+ turbo? not sure I like the idea of that turbo with a log manifold. Looking good so far however

[ian4455]

Isn't the hx35 a 400+ turbo? not sure I like the idea of that turbo with a log manifold. Looking good so far however

log manifold is from 034motorsport, may as well give it a go.

[LHD_Kid]

Coil Pack wiring has turned out nice, it's easy to run the 5 new cables down to the ECU behind the battery through a spare rubber inlet on the fire wall.

Nice, are you dry sumping?

[ian4455]

No dry sump plans, i need to get the car running first again on VEMS then go from there. Quite a bit to learn first and good stuff to keep me busy !

[djh]

log manifold is from 034motorsport, may as well give it a go.

spend some time cleaning up the manifold with a dremel, if its like the one's i've seen it will be proper awful inside.

[LHD_Kid]

Coil Pack wiring has turned out nice, it's easy to run the 5 new cables down to the ECU behind the battery through a spare rubber inlet on the fire wall.

Link to your pic, without oil filler

No dry sump plans, i need to get the car running first again on VEMS then go from there. Quite a bit to learn first and good stuff to keep me busy !

Just wondering then, how will you put the oil in?

[Jamo]

Probably dipstick tube

[ian4455]

Catch tank to put the oil in !!

[Jamo]

Catch tank to put the oil in !!

Is that the only option? I don't like that idea, catch tank collects waste and then your cycling new oil through it.

[ian4455]

Air con removed now so the oil return in the side of the block is available !

[ian4455]

Update, my car starting up on VEMS with new Coil Packs Fitted. http://www.youtube.com/watch?v=jAA5OLGxA5s

[Sleeper_Avant]

Ian i tried PMing you but to no avail as your inbox is full!

[Sleeper_Avant]

**cut n pasted PM, nowt odd lol

Alright matey,

or now then since your a fellow northern lad

why did you use a 7a cam cover for the coils conversion and not the 3b,

looking at the pics i think ive answered it myself for the gap against the exhaust cam side lol

havent tried it wth a coil yet, but i suspect this is it.

Cheers, Sean

p.s did you buy a load of 10v stuff about 5yrs ago?
i sold a load f stuff to a lad called Ian thats all