1992 urS4 family sedan

[quattrostyle]

Ah okay, that makes somewhat sense then.
I'd like to see a launch when everything is set up so that the launch is as quick as possible

[kenax]

will do a video at some point. Right now it's just too rainy and cold every day to get proper grip.

[vcosmin]

Are you runing stock transmision parts all around ?

[kenax]

Yes. I have another set of drive axles and a few rear diffs. Need to look into strenghtening places during the winter.

[Prosac]

Hi kennax,
I follow your videos on YT already very long and am enthusiastic about your car. I have even a Urs6 avant. Currently, a HOLSET HX40Super with 16 cm 2 housing is in it. Manifold PK-Motorsport. Mechanical valve drive. Engine management is vems. What can you expect as such? Is the HX40Super not for more than 510 hp?

( Sorry for my bad english )

[kenax]

HX40 Super goes even up to 700hp when everything is right.

[Prosac]

Ok Thank you. I'm excited about.

[UrS4boy]

Hi kennax, I follow your videos on YT already very long and am enthusiastic about your car. I have even a Urs6 avant. Currently, a HOLSET HX40Super with 16 cm 2 housing is in it. Manifold PK-Motorsport. Mechanical valve drive. Engine management is vems. What can you expect as such? Is the HX40Super not for more than 510 hp? ( Sorry for my bad english )

Have you upgraded your rods already? e.g. Carillo, Pauter, Scat, etc.

[Prosac]

the connecting rods, bearings and seals are all new. cylinders are bored and honed. on the engine, everything is actually new. the drive crank is balanced.

[igor007]

Nice!!

[kenax]

If everything goes as planned, this family sedan will have some major updates for 2013.

Dry sump, balanced crank, new silent 2,5" exhaust with 4,5" cut-out, completely new floating disc brakes... among a few other minor upgrades..

I also have another project going on..

[Prosac]

in finland, it often seems to be too much boredom.

[|Maku|]

Suspension, brakes and wheels:
- Front H&R springs, rear Avant Eibach's, both cut down some

Why didnt You use both front and rear H&R springs?

[kenax]

Why didnt You use both front and rear H&R springs?

the tail was way too high and ssoft for my taste. and it still is a bit too soft, going to tighten it up this winter.

[|Maku|]

the tail was way too high and ssoft for my taste. and it still is a bit too soft, going to tighten it up this winter.

With H&R springs the end of the car was higher than the front?