Originally posted by simon20vq
View Post
Announcement
Collapse
No announcement yet.
Audi S2 Track Torpedo from PL
Collapse
X
-
Last edited by Albert; 4 September 2014, 10:06.AKmotorsport.net - Manufacturing Motorsport parts that do the job. | Audi S2 on Facebook | Best way of reaching me is sending email to albert@akmotorsport.net
-
Gearing up for this sunday on the track
AKmotorsport.net - Manufacturing Motorsport parts that do the job. | Audi S2 on Facebook | Best way of reaching me is sending email to albert@akmotorsport.net
Comment
-
Originally posted by Jaswan View PostCan I ask where you bought your Kevlar body panels from?AKmotorsport.net - Manufacturing Motorsport parts that do the job. | Audi S2 on Facebook | Best way of reaching me is sending email to albert@akmotorsport.net
Comment
-
On Saturday we did some testing in the car. Previously Audi had a problem with the rear brakes. They were too strong, blocking the wheels while braking. The new setup is with much smaller pistons in the brake caliper - 4 piston rear Brembo caliper on 330 mm disc with Ferodo DS2500 pads. It works much better than the previous one.
AKmotorsport.net - Manufacturing Motorsport parts that do the job. | Audi S2 on Facebook | Best way of reaching me is sending email to albert@akmotorsport.net
Comment
-
We where set for Sunday track day but we did not make it. Now it is confirmed - the problem from Saturday caused the injectors. Today, after a flow test, two out of five injectors did 1/3 of the flow. They were cleaned and checked again. 1% difference on all We need to refit them into the car and make a test run.Last edited by Albert; 10 September 2014, 09:53.AKmotorsport.net - Manufacturing Motorsport parts that do the job. | Audi S2 on Facebook | Best way of reaching me is sending email to albert@akmotorsport.net
Comment
-
It is tempting to try cams sprocket now. I have both cams form N/A 7A engine (410 HP with K26 hybrid) but possibility to adjust them further has been on my mind for the last two weeks. Will they actually do any good ?
AKmotorsport.net - Manufacturing Motorsport parts that do the job. | Audi S2 on Facebook | Best way of reaching me is sending email to albert@akmotorsport.net
Comment
-
Getting naughty in the night
AKmotorsport.net - Manufacturing Motorsport parts that do the job. | Audi S2 on Facebook | Best way of reaching me is sending email to albert@akmotorsport.net
Comment
-
They will be realy soon.AKmotorsport.net - Manufacturing Motorsport parts that do the job. | Audi S2 on Facebook | Best way of reaching me is sending email to albert@akmotorsport.net
Comment
-
new tuning with cams sprockets. Finall result 430 HP / 507 NM.
AKmotorsport.net - Manufacturing Motorsport parts that do the job. | Audi S2 on Facebook | Best way of reaching me is sending email to albert@akmotorsport.net
Comment
-
It is hybrid turbo build on top of K26 (Audi 100/200 - any 10VT ). CNC titanium cold side wheel. Specs ... I don't know It spools very fast and is safe/perfect for stock internals.
If you send me K26 I can have it modified for around 400 pounds + shipping. I can also arrange K26 if needed.Last edited by Albert; 24 September 2014, 16:07.AKmotorsport.net - Manufacturing Motorsport parts that do the job. | Audi S2 on Facebook | Best way of reaching me is sending email to albert@akmotorsport.net
Comment
Comment