UrS4 2.2T Sedan project

[hunker7]

I wonder if they're made of steel or they've remanufactured them in something that doesn't rust.

What setup you have at the front, shocks/bushes?

[s0_big]

For all 3 fuel lines it was 350 euros. But if you skip the carbon filter return line ut was only 100 euros. Those "kits" have different art nr.
Well i cant tell any differens with the new bushings yet because i need to drive a bit more first. But i can hear a little bit more noise from the drivetrain, nothing disturbing but i hear a differens.

[hunker7]

100 euros for 2 fuel lines? I am drfinately popping in my local dealer to see how much they are

How does the car feel with poly bushes mate?

[s0_big]

So a few days ago the first test drive was made. Went good. But when i stopped at the gas station i saw something dripping from the car.. It was the fuel returnline that was leaking. I bought new pipes from Audi, was not so bad, like 100euro. I bought without the pipe for the active carbon filter as i dont use that any more and the price was 350Euro..

The new pipes that came with new mountings.


Art nr:


Yesterday i was at the wheel shop and did a wheel alignment. Then i started to assemble my "new" head.
Mounted the lightweight lifters and the 7A camshafts, here is the head resting in the sunlight:

[s0_big]

Jäklar vad fint

Have you converted to e85 allready ? And the fuel system you just put an 044 in the tank and changed the injectors ? Any guesses what hp that setup would do on e85?

///Filip

Tackar
No i haven't, still runs on 98 octane. Yes, 1000cc injectors and a 044 pump, also changed the fpr to a 3 bar since the injectors only needed 3bars of fuelpressure as lowest.

[Filip_FIN]

Jäklar vad fint

Have you converted to e85 allready ? And the fuel system you just put an 044 in the tank and changed the injectors ? Any guesses what hp that setup would do on e85?

///Filip

[s0_big]

Did you remove old underbody coating before applying sealant?

I didnt Clean away all the underbody coating. Just where there was rust and where the bodypaint was loose.

[hunker7]

Did you remove old underbody coating before applying sealant?

[s0_big]

Today i finished the brakeline and connected the brakes. Thought my exhaust was a little bit ugly to just mount back so i gave it some time with the grinder to give it some shine Next step is to testdrive and then go and do a wheel alignment.

[Majorcina]

Looking good mate!

Poslato sa G7-L01 uz pomoć Tapatoka

[s0_big]

Today i got the time to mount the rear subframe. Assembled the thing and put it back on the car. Now i just have to make a new brake line and i'm done. Then i will make a wheel allignment. Hopfully it feels better on the road

Rear subframe assembled:


Mounted on the car:


Maybe i will put some time on the car tomorrow. Also got me some new hand brake wires. Feels wery good to cross this one of the list, been a lot of work the last days..

[s0_big]

Got some work done on the car. Cleaned the body and painted it.
Painted the tank and the rear diff. So in the weekend i will put the rear subframe on again

Body work:



Tank painted:


Rear diff painted and some mounted brackets:


Finally the tank is up again:

[s0_big]

So today i thought i would be able to start with the rear body work. But instead i did some sandblasting with the small brackets and stuff. After looking at the rear end i realized that i would be stupid if i didn't pull the fuel tank down. The tank it self had some corrosion, and i wouldn't get acces to everything when i paint, so i decided to pull that one out as well.

Fuel tank down:


Fuel tank:



Now i'm only waiting for the paint and of course the time to clean everything and get it ready for paint. I wish my girfriend gave me moore time in the garage...

[Vorsprung durch Technik]

Love it,looking forward to the updates.

[rxl]

Shiny subframe [emoji6] [emoji106]

Gesendet von meinem GT-I9505 mit Tapatalk