Project Mental Wheels

[macspring]

Obviously I've been following this thread closely along with everyone else, and I note your 'frustration' with the time it is taking to complete the car.

Have quick scan of this link and you'll be much happier with any 'apparent delay'.

Yours is getting done and there are photos to prove it.

http://www.s2forum.com/forum/showthr...ar+quattronics

Posted also for newer members as a salutary warning to always be careful.

Enjoy, you'll have it soon enough.

Really look after it and baby it when you do get it, and I mean that nicely given your recent incident, it is far too nice / valuable to 'dog' in any way. Use one of your other ones for 'dogging' :roll eyes: / thrills.

Kind regards.

[cardcrash]

Yeah, I heard that Corey guy ripped a few people off to the point he got his own emoticon :corey:, I read the first page of that link and saw that stripped avant. It's unbelievable this guy isn't in jail being bummed by 18 stone skinheads.

[Sonic]

Obviously I've been following this thread closely along with everyone else, and I note your 'frustration' with the time it is taking to complete the car.

Have quick scan of this link and you'll be much happier with any 'apparent delay'.

I detect a large amount of feature creep as well, which i'm very familiar with having visited VRS on quite a few occasions

Hang in there, it's in safe-hands and Will'll get it done to the highest standards... he's certainly no Corey Jones!

It could be worse, you could still be waiting for paint/bodywork...

[cardcrash]

Yeah Will's a good guy and he's put in countless hours for tiresome shi**y little jobs which he's not billed me for, so I really have no right to complain.

[cardcrash]

So some updates, not much but something:

Seat frames back from the powder coaters:


Harnesses:

[cardcrash]

Ok, some Christmas updates, really not much but something to keep the dream alive...

Here we have a set of gauges that came out of Kit's S2:


As you can see he modified them to be angled towards the driver, a subtle but very effective feature. They, of course, will be cleaned up and painted but I'm very chuffed to have these as it saves Will having to modify a set I got especially for this, cheers Kit!:


The radiator, like many other things, has been blacked up like a brother:




Another shot of the harness frame/roll bar:


Some mess, that Will won't be happy I've posted up but it'll make the finished article all the more impressive when it's all cleaned up, especially when you see what's going to be there in it's place:


The alternator, another component that's been blacked up:


A heat shield, photographed so close up it's hard to tell where it actually is:


And another shot of the snug looking seats:


Merry Christmas everybody!!

[cardcrash]

A few minor updates since Christmas...



















I think the build is drawing to a close now I'll know more on Monday

[sailaz]

by the chance do you know what thickness in microns is this filter ?

[cardcrash]

I don't, sorry. You'd have to ask Will.

[macspring]

Thanks for the update.

Should be lovely to look at for all and to drive for you when it's done.

Not too long now in the overall scheme of things.

[cardcrash]

Hopefully not, as I said I should get a call from Will tomorrow to let me know just what's left to do. He said last week that dyno time was approaching so I'm pretty excited about that.

[fridtjov-audirs2]

Really like that roller gage :-)

[Error404]

Can I rename this "Project Glacier"?

[cardcrash]

Can I rename this "Project Glacier"?

Hmm, I'd like to say the end is in sight, and it is in the very final stages but I think I've said that so many times now no-one will believe me

Also Alex, I must extend my gratitude towards you as it was you who brought to my attention a catastrophic oversight that if neglected would have resulted in the whole project being lost and the car being sent to the scrapyard.

Looks great, you need to dig deep and splash out on a new oil cap buddy

So after many months careful planning using hi tech laser scanning, CAD and complex mathematical calculations we were able to step in at the last minute...

...problem rectified, project saved!!

Also the rad is now properly mounted


Catch can made...


...and painted


With a little unashamed product placement


So yeah, I'm really hoping this will be done very soon. Will said he wanted to get it done by the end of the month and I'd like to believe that, oh how I would love to believe that, I just won't, not until I'm invited up for dyno fun time.

[Az786]

Looks sweet