Announcement

Collapse
No announcement yet.

Audi S4 2.2t Build

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    A while since an update now


    But does not happen as much in the garage during summer



    Well, the intercooler construction went straight into the bin!!
    ~0.8bar/11psi pressure drop ... worthless

    It did not come as a surprise, had almost expected pressure drop, but maybe not so much


    But that's nothing to cry about, just to assemble back the old system again!












    A fun thing was anyway that I came in 3rd place in the largest Audi meet I Sweden, NordicAudi SwapMeet woop woop






    Finished 2nd place last year and still chasing that 1st place





    And after the inspection in November (which went perfect), It sounded like the engine had started to knock, much like conrod bearing failure.
    So it was just to start tearing out the engine before it got worse, I thought!

    But everything looked like new ...! All bearing play was within tolerance ..

    Then I discovered when I talked on the phone and stood and fiddled at the power steering pump, that it locks up every two revolutions.

    So I tore the whole engine apart when it would have been enough to change the power steering pump.

    I should have removed the fan belt before I tore apart the engine. but easy to be wise after the event!






    Now I at least know that the engine is in good condition!
    Took the opportunity to replace the bearing when the engine is still in pieces



    Changing to a 6 speed gearbox, just beacuse I had one laying around





    Before I put the engine back again shall I do something about the engine harness so it looks good (not visible at all) and clean up the entire enginebay so that it looks perfect!



    Are replacing cams, injectors and intake now when the engine is out, and then do a dyno tune ... need to get over 600whp !!



    Will be some reconstructions this winter ...
    Need to get a bigger oilcooler, the olitemp is raising fast as hell
    2015 Audi A4 Quattro Sports edition
    1992 Audi S4 2.2t Quattro
    1986 Audi 80 Quattro
    1985 Audi GT Quattro
    1966 VW Bug (Herbie replica)
    https://www.garaget.org/Aandreaaz

    Comment


    • #17
      hi are you going to use bigger injectors?

      Comment


      • #18
        S4 2.2 T

        Hi there,
        Way to go brother and will tune in to follow with great interest since I have 1 1994 S4 that I have planned on to upgrade but not so much as you and a lot to learn. maybe can feed off some of your experience as my learning curve.
        Best of luck.

        kj6304
        Boston, MA

        Comment


        • #19
          Originally posted by peter20vt View Post
          hi are you going to use bigger injectors?
          Yep, I have bought Bosch 2200cc injectors
          2015 Audi A4 Quattro Sports edition
          1992 Audi S4 2.2t Quattro
          1986 Audi 80 Quattro
          1985 Audi GT Quattro
          1966 VW Bug (Herbie replica)
          https://www.garaget.org/Aandreaaz

          Comment


          • #20
            Originally posted by kj6304 View Post
            Hi there,
            Way to go brother and will tune in to follow with great interest since I have 1 1994 S4 that I have planned on to upgrade but not so much as you and a lot to learn. maybe can feed off some of your experience as my learning curve.
            Best of luck.

            kj6304
            Boston, MA
            Will there be any project thread on it?
            2015 Audi A4 Quattro Sports edition
            1992 Audi S4 2.2t Quattro
            1986 Audi 80 Quattro
            1985 Audi GT Quattro
            1966 VW Bug (Herbie replica)
            https://www.garaget.org/Aandreaaz

            Comment


            • #21
              Lovely to see another great C4.

              Thanks for sharing. Always good to be able to learn from other's expertise and experiences with these C4 and B series cars.






              Comment


              • #22
                Originally posted by Aandreaaz View Post

                Got hold of a leather interior that I treated, became fairly good


                Very impressive work / result. Any more information / method / products used ?

                Thanks either way.






                Last edited by macspring; 13 January 2017, 12:31.

                Comment


                • #23
                  Originally posted by Aandreaaz View Post


                  I am assuming the 'sump vent' from an I5 2.5L diesel is being used because of the power output of the engine, but can I ask how this item is better than other aftermarket arrangements.

                  Just curious to learn - no pressure.






                  Comment


                  • #24
                    Originally posted by Aandreaaz View Post


                    What are your thoughts on the use of the cone filter near the hot exhaust, rather than in air intake from the inner wing or low down in the front passenger side grille ?






                    Last edited by macspring; 17 January 2017, 23:16.

                    Comment


                    • #25
                      Originally posted by Aandreaaz View Post

                      Bought Schrick cams
                      Intake 260°, cam lift 10,9, valve lift at TDC 0,8,
                      Exhaust 260°, cam lift 10,9, valve lift at TDC 0,9


                      Do you / anyone know what the spec of the AAN cams and the 7a cams are for comparison purposes with the specs of the Shrick cams ?






                      Comment


                      • #26
                        Originally posted by macspring View Post
                        Very impressive work / result. Any more information / method / products used ?

                        Thanks either way.



                        I used black leather color/restorer, leatherconditioner and a lot of time
                        2015 Audi A4 Quattro Sports edition
                        1992 Audi S4 2.2t Quattro
                        1986 Audi 80 Quattro
                        1985 Audi GT Quattro
                        1966 VW Bug (Herbie replica)
                        https://www.garaget.org/Aandreaaz

                        Comment


                        • #27
                          Originally posted by macspring View Post
                          I am assuming the 'sump vent' from an I5 2.5L diesel is being used because of the power output of the engine, but can I ask how this item is better than other aftermarket arrangements.

                          Just curious to learn - no pressure.



                          What other aftermarket arrangements are you referring to?
                          This is an easy and simple fix of the ventilation! Me and some of my friends have had good experience with this setup
                          Last edited by Aandreaaz; 16 January 2017, 07:52.
                          2015 Audi A4 Quattro Sports edition
                          1992 Audi S4 2.2t Quattro
                          1986 Audi 80 Quattro
                          1985 Audi GT Quattro
                          1966 VW Bug (Herbie replica)
                          https://www.garaget.org/Aandreaaz

                          Comment


                          • #28
                            Originally posted by macspring View Post
                            What are your thoughts on the use fof the cone filter near the hot exhaust, rather than in air intake from the inner wing or low down in the front passenger side grille ?


                            There is usually an cut original S4 air duct there, the one that goes to the airbox, but this picture is from a car show and the duct is ugly, so i took it away

                            You can see it on the picture with the gearbox, it lying on the ramp just above
                            2015 Audi A4 Quattro Sports edition
                            1992 Audi S4 2.2t Quattro
                            1986 Audi 80 Quattro
                            1985 Audi GT Quattro
                            1966 VW Bug (Herbie replica)
                            https://www.garaget.org/Aandreaaz

                            Comment


                            • #29
                              Nice car. Are you satisfied with water silicone hose ?
                              1-2-4-5-3

                              Comment


                              • #30
                                Originally posted by igor136 View Post
                                Nice car. Are you satisfied with water silicone hose ?
                                Have not had any problems and they look good, so can not complain
                                2015 Audi A4 Quattro Sports edition
                                1992 Audi S4 2.2t Quattro
                                1986 Audi 80 Quattro
                                1985 Audi GT Quattro
                                1966 VW Bug (Herbie replica)
                                https://www.garaget.org/Aandreaaz

                                Comment

                                Working...
                                X