Audi S2 rear brake upgrade

[Stianl]

Hello.

Need these part for an upgrade on the brakes at the rear;

B7 Disc, 300x22 vented - 8E0 615 601R (2-off)
A8/S8 carrier - 4D0 615 425C (2-off)
Calipers from RR quattro or UrS4/S6 - 447 615 423 and 447 615 424
S8 pads for those 280mm discs - 1J0 698 451L

Calipers should be in good condition, and emergency brake function fully operating.

Anyone?

Best regards.
Stian.
Norway.

[Rocco]

Hello.

Need these part for an upgrade on the brakes at the rear;

B7 Disc, 300x22 vented - 8E0 615 601R (2-off)
A8/S8 carrier - 4D0 615 425C (2-off)
Calipers from RR quattro or UrS4/S6 - 447 615 423 and 447 615 424
S8 pads for those 280mm discs - 1J0 698 451L

Calipers should be in good condition, and emergency brake function fully operating.

Anyone?

Best regards.
Stian.
Norway.

dont you want B7 300x22 dics ,porsche 996 boxter S calipers,pads and custom brackets for coupe rear?

[Drummer87]

I agree with rocco. That's just brake porn

[Rocco]

I agree with rocco. That's just brake porn

i have this brake setup for more than 2 years and was wondering to sell them for more porn in the rear

[jamie9048]

Rocco what do you use as a parking brake

[Rocco]

Rocco what do you use as a parking brake

K-Sport hydraulic hand brake ,it passes MOT easily,i only need to action the hand brake and it brakes....it seems magic fot the MOT mechanics

[Henkjan]

does that hold the pressure for a longer period of time, e.g. whan the car is parked with the handbrake on?

[Drummer87]

Where's the kit rocco?? For sale section link below

[John B]

Hello.

Need these part for an upgrade on the brakes at the rear;

B7 Disc, 300x22 vented - 8E0 615 601R (2-off)
A8/S8 carrier - 4D0 615 425C (2-off)
Calipers from RR quattro or UrS4/S6 - 447 615 423 and 447 615 424
S8 pads for those 280mm discs - 1J0 698 451L

Calipers should be in good condition, and emergency brake function fully operating.

Anyone?

Best regards.
Stian.
Norway.

Hi Stian

If a coupe have you seen http://www.s2forum.com/forum/showthread.php?t=62766


Cheers,

JB

[Rocco]

does that hold the pressure for a longer period of time, e.g. whan the car is parked with the handbrake on?

It seems yes but I'll never try it with the car parked in a hill ,I always park the car with the a gear.

Where's the kit rocco?? For sale section link below

Not yet! Because I've to think somethings before put hands on it.

But they'll be advertised for sure.

[Colesy]

was wondering to sell them for more porn in the rear

You Spaniards!!

[Val]

Bigger rear brakes than front will look funny while braking

[Rocco]

You Spaniards!!

Are you interested?

Bigger rear brakes than front will look funny while braking

Even more with a brake pressure regulator!

[Nik0las]

Hello.

Need these part for an upgrade on the brakes at the rear;

B7 Disc, 300x22 vented - 8E0 615 601R (2-off)
A8/S8 carrier - 4D0 615 425C (2-off)
Calipers from RR quattro or UrS4/S6 - 447 615 423 and 447 615 424
S8 pads for those 280mm discs - 1J0 698 451L

Calipers should be in good condition, and emergency brake function fully operating.

Anyone?

Best regards.
Stian.
Norway.

You don't need all this stuff seprately. Just take S8 rear calipers + discs or S8 rear calipers + B7 discs in a case you want 300x22mm vs S8 disc 280x22mm calipers and carriers are same...
I think that I had somewhere one set of rear S8 calipers

[Colesy]

You don't need all this stuff seprately. Just take S8 rear calipers + discs or S8 rear calipers + B7 discs in a case you want 300x22mm vs S8 disc 280x22mm calipers and carriers are same...
I think that I had somewhere one set of rear S8 calipers

You need the face lift S8 rear carriers, from 1999 onwards. The earlier carriers were built for 20mm discs and aren't wide enough for 22mm vented discs. Watch out buying these off breakers as they don't seem to have a clue and will sell you the early carriers which won't fit. I found out the hard way!