Controlling IC spray with VEMS?

[Jonas_R]

Is it possible to control a Intercooler spray system with VEMS?

What I would like to do, is activate a valve for a period of time, when the intake temperature goes past a specific point and also need to setup one more parameter related to either boost or RPM so I can control that it does not spray when I driving around in the city etc.

/Jonas

[a4kquattro]

Is it possible to control a Intercooler spray system with VEMS?

What I would like to do, is activate a valve for a period of time, when the intake temperature goes past a specific point and also need to setup one more parameter related to either boost or RPM so I can control that it does not spray when I driving around in the city etc.

/Jonas

check under the "misc outputs" section. use one of the spare output channels wired into your SC6 connector. just remember most of those are low current, so use them to switch a relay.

[Jonas_R]

Thanks Marc I will have a look.

On another question, is it correct that you need to make a special request when ordering your VEMS box if you need to control the carbon canister valve?

[a4kquattro]

Thanks Marc I will have a look.

On another question, is it correct that you need to make a special request when ordering your VEMS box if you need to control the carbon canister valve?

yes.

[Jonas_R]

****** , that kinda sucks

[a4kquattro]

****** , that kinda sucks

tis' why people order from dealers who have BTDT and know how to config the boxes. wink wink. nudge nudge

[Jonas_R]

Yeah oki I guess vems.hu has not BTDT then But I get your point.

Guess I will have to use a wire and control it via the SSC6 connector instead.