VEMS I5 Maps

[danycheung]

hey KRIENG,

what fuel are you running?
what turbo?
engine specs?


just commenting.. i see mat a little hot with 25deg of spark..

[KRIENG]

VE is easy try to set = EGO corr Ve
when no acc enrich , no de acc

[bn-01-wso]

hello everybody. This is my first post here on this forum. i am new, never worked with a standalone ecu before. I have an mc engine with 630cc siemens deka and garrett gt30, 60-2 wheel in the flywheel seal with hall sender and sec trigger is the distributor with one window(ive cuted down the oder four). Im just looking to get it started to check for leaks before i go to a pro tuner. I run vag COP. I repeat im new to this, any help will be highly apreciated. i've atached a cofig file an a trigger log file. I just want to get it started. thanks a lot

[A80Avant]

Too much information for someone that is just beginning. Since its for free, hopefully someone will find it useful.

For the question asked, VE is the fueling map in vems taking into account all of the above.

[prj]

VE in an ideal world stands for volumetric efficiency.
This basically says how well your engine flows.

It does not depend on injectors at all, it is a model which tells the ECU how much cylinder filling there will be at a certain MAP and RPM.

On a mass-flow based system, cylinder filling = mass air / rpm.
On a speed density system, cylinder filling = (MAP * VE)/ IAT.

If you need to alter VE on a speed density system when you change injectors it means that either you did not manage to correctly linearize the injectors (dead time, slope characteristics) or your ECU does not provide the possibility to do it.
And that way your injector characteristics get coded into the "filling" map (or VE).

It is similar on a mass-flow system. If you need to change anything besides the injector calibration (dead time, slope, size) on a mass-flow system, such as the main fuel map, you are also not calibrating the injectors correctly.

[Biturbo]

Hi, im new in Vems. What is the values you put in the VE table? Is it persent of something or is it ms (millisecond) or something else?

Se you guys have way different Req Fuel numbers, are you using the formula or what?

Thanx

You can use auto tune for first and see how is changing.All ve table is custom for every car.It's depends from you injectors,turbo,how good flow your engine head,from everything.

[A80Avant]

Look at the efiexpress documents for all of your questions. These are fairly basic and the answers are there. In summury the VE number is a number that vems uses to internally calculate fuel, so its not ms of injection. The req-fuel comes off an equation from your injector size.

[Tbend]

Hi, im new in Vems. What is the values you put in the VE table? Is it persent of something or is it ms (millisecond) or something else?

Se you guys have way different Req Fuel numbers, are you using the formula or what?

Thanx

[danycheung]

its ok, i didnt buy any of those ones, i found one used rs2 manifold.

[prj]

thanks, i think im getting the RS2

That is not a RS2 manifold!
It's a STR log manifold, not very good.

The other one is completely cr*p it will break after 1 month.

[Biturbo]

yea yea... it is almost impossible to get stuff for AAN engine here where i live...
all we have around are for JDM..

:/ where can i buy online a affordable ex manifold? kinda low budget rite now.

and you can get good from www.customparts.com.pl/en

[danycheung]

thanks, i think im getting the RS2

[Rocco]

yea yea... it is almost impossible to get stuff for AAN engine here where i live...
all we have around are for JDM..

:/ where can i buy online a affordable ex manifold? kinda low budget rite now.

thats cheap

http://www.ebay.co.uk/itm/Audi-RS2-S...item2ec21ef6c5

http://www.ebay.co.uk/itm/Audi-2-2l-...item335b457825

[danycheung]

yea yea... it is almost impossible to get stuff for AAN engine here where i live...
all we have around are for JDM..

:/ where can i buy online a affordable ex manifold? kinda low budget rite now.

[Rocco]

oem exhaust manifold with GT35?