Vems V3 AAN P&P - Injector 4 not working.

[quattro-nick]

the engine is running way too rich!
it can be:-wrong settings in BASE SETUP-engine setup
-too high fuel pressure
-wrong values in ve table
-throttlebody and lambda calibration
or let the engine running and go to TOOLS and click "live ve analyser"
now you can see if vems can write the ve table automatic on idle

[happykriss]

the engine is running way too rich!

U don't say. Made one boost pull and turned around starting to wonder if i drove it on diesel..

I will try to do the throttlebody cal. Did the lambda right before i screened this.
where do i preform the cal if i may ask?

[happykriss]

correct me if i'm wrong. TPS is throttlebody?

[quattro-nick]

under lambda (wbo2) calibration in TOOLS
"tps calibration"

[quattro-nick]

correct me if i'm wrong. TPS is throttlebody?

yes,Throttle Position Sensor

[happykriss]

Thanks. Will check it out later. Can't afford to mess this engine up so i'm playing it as safe as i can

[happykriss]

It was 21 low instead of 17. Did the change but no significant difference. It feels good under boost, but smells a little on idle. I also noticed it can become unstable on low rpm and rough idle for some time before it settles back to stable idle. wondering if there maybe a vacuum leakage somewhere.

sorry for my lack of explanation. Won crappy explanation championship 8 years in a row.

[UrS4boy]

correct me if i'm wrong. TPS is throttlebody?

TPS = throttle position sensor *ATTACHED* to the throttle body. Two different things that are connected to each other.