ok. So i'm putting the car back together at the moment and am wondering if there is a depth guide of how much of the ABS sensor should protude into the hub??
Or alternatively how far the sensor should be in looking from a top view??
All sensors are new (2 new 2 used) / hubs and wheel bearings refurbed/replaced so I dont have one to use as a starting point
All I know is with the sensor fully "down" so it cannot be pushed down further (due to the top rim of the copper sleeve) it catches on the toothed part of the hub that it reads off !!!
Any pictures of a fully working /well fitted sensor would be great also
I know its critical to get the distance right so I want them all at OEM specification ideally if anyone can help? (spec sheet, BTDT etc)
THANKS
Or alternatively how far the sensor should be in looking from a top view??
All sensors are new (2 new 2 used) / hubs and wheel bearings refurbed/replaced so I dont have one to use as a starting point
All I know is with the sensor fully "down" so it cannot be pushed down further (due to the top rim of the copper sleeve) it catches on the toothed part of the hub that it reads off !!!
Any pictures of a fully working /well fitted sensor would be great also
I know its critical to get the distance right so I want them all at OEM specification ideally if anyone can help? (spec sheet, BTDT etc)
THANKS
Comment