Announcement

Collapse
No announcement yet.

porsche brakes

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • porsche brakes

    this has probably been asked loads of times but i couldnt find a thread, will s2 16" avus alloys fit over porsche 4 pot calipers and a8 323mm discs.
    thank you in advance.

  • #2
    Not with 323mm discs Maybe 314mm discs

    Comment


    • #3
      thanks for the advise

      Comment


      • #4
        would b5 s4 wheels fit over them?

        Comment


        • #5
          Yes , no problem ( b5 s4 17's )
          16's won't go over the 323mm disc
          S2 Cabriolet.........

          Comment


          • #6
            cheers for the help.

            Comment


            • #7
              fyi b5 s4 wheels fit over the porsche 993tt disc and gt2 6 pot no porbs

              Comment


              • #8
                16s go over 314mm. I ran original ABY 16" Avus II for many years with these underneath.
                Last edited by Rusty; 31 October 2017, 13:40.
                Cheers'en, AndyC
                1994 ABY Coupe - Projekt Alpinweiss

                Comment


                • #9
                  Originally posted by Rusty
                  16s go over 314mm. I ran original ABY 16" Avus II for many years with these underneath.
                  Me too

                  S2 Coupe 3B Project


                  Ur quattro restoration

                  S2 Avant

                  Boost is the new rock and roll!
                  sigpic

                  Comment


                  • #10
                    i've got some porsche 4 pot calipers and the 323mm, but getting the 314mm discs is an option. what car are the 314mm off?
                    thanks in advance

                    Comment


                    • #11
                      I think a8 d2? My old setup was 314mm using Boxster s front calipers

                      Comment


                      • #12
                        are any spacers needed or any modifying to use the 314mm? or straight bolt on under 16" avus?
                        cheers

                        Comment


                        • #13
                          ive got 323mm disc's and standard Avus wheels with no spacers, not with Porsche calipers tho.

                          Comment


                          • #14
                            Originally posted by tango123 View Post
                            are any spacers needed or any modifying to use the 314mm? or straight bolt on under 16" avus?
                            cheers
                            I’m not 100% sure as I had 18” wheels.The hat height of discs sit further in chassis as well as calipers if they don’t clear oem alloy spokes? Try some wheel spacers

                            Comment


                            • #15
                              This set up is RS2 caliper carriers, with Boxster S(996) calipers and 323 S8 rotors. The Avus 16" will fit over this combo. Here are a couple of pictures takes with a Avus 16" wheel mounted. A light is put behind the caliper, in order to show the small gap.
                              You do not have permission to view this gallery.
                              This gallery has 1 photos.
                              They can have my car when they pry my cold dead fingers from the steering wheel.

                              Comment

                              Working...
                              X