You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
I upgraded the front brakes (small reds) on my rs2 to 996tt calipers and porsche 322 discs.
This bracket ONLY works on rs2 with 965.351.045/046 discs and 996 351 429/430 calipers. I made the bracket out of 12mm L steel.
I upgraded the front brakes (small reds) on my rs2 to 996tt calipers and porsche 322 discs.
This bracket ONLY works on rs2 with 965.351.045/046 discs and 996 351 429/430 calipers. I made the bracket out of 12mm L steel.
Thank you! At last bracket dimensions, no-one else would post them
Ok, so i bought a whole set of 996 turbo/gt3 brakes for £800 with the knowledge that they might fit, but if they did't then i should be able to sell them on without taking a hit!?
2 x front calipers 996.351.429/996.351.430
2 x front discs 330mm x 32mm
2 x front pads
2 x rear calipers 996.352.425/966.352.426
2 x rear discs 330mm x 28mm
2 x rear pads
as i say i bought the above from pistonheads and they had only covered 100miles as the they 911 was upgraded to PCCB.
After phone call with Corey i found myself on the road up to Newark for a bit of measuring and carrier designing.
The fronts were going to fit a treat with about 3mm clearance, even if we would have to move the wheel balancing weights about.
The rears sadly, were not going to be so easy, as the disc hat is abt 4mm deeper than the original RS2 disc. It could have been spaced out, but i decided to abandon the rears. (which i have sold on for £400).
a couple of weeks later the carriers had been machined and everything was ready to bolt on and the above pics is the end result.
I will be upgrading the rears at some stage with monos of some sort?
Now the pads have bedded in nicely, i have been trying them out !!!!!!!! and the change is amazing. So much braking power and the feel is nice and progressive.
I think i have become addicted to braking!
Don't happen to know the part numbers of the 330x32mm disc you used?
Now I have searched everywhere (i think) and have found some more information that I can use.
The question that remains for me is what is the difference between the GT3 (mk1) and ordinary 996/996Turbo discs are? (330x34)
Everywhere I find that the GT3 is more expensive, although there seems to be the same dimensions? Are there different "height" on them?
What are the correct discs when it comes to mount them on my RS2?
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment