boxster s caliper question

[avants2turbo]

ah, this is the set on ebay at the moment... The auction ends tomorrow doesnt it?

[Le S2 Audi]

They were on ebay - but I have also got a front set coming from the states.

Ended up with two sets.... Such is life!!

[avants2turbo]

any chance u can measure your calipers and give me the offset measurement of the front calipers (as per the the little picture with the yellow lines on)

[Le S2 Audi]

I'll see what I can do, but I'm not fitting them and I don't have any pads yet.. so it maybe a while before I have chance....

[avants2turbo]

I'll see what I can do, but I'm not fitting them and I don't have any pads yet.. so it maybe a while before I have chance....

you dont need to fit them, or need pads in them, just the measurement between the bolt holes and the centre of the caliper

[gavs20v]

Its approx 50mm
Gav

[bambridge]

They were on ebay - but I have also got a front set coming from the states.

Ended up with two sets.... Such is life!!

Hi Ken,

When they arrive let me know and i will pop over with the brackets, and check there what you need

[avants2turbo]

Its approx 50mm
Gav

how "approx" is that?

[gavs20v]

i can try and measure it more acurately tomight as its up on axle stands with no wheels or suspension on atm. Plus or minus 2mm max. It was with a measuring tape. Ill use a proper metal rule tonight
Gav

[avants2turbo]

i can try and measure it more acurately tomight as its up on axle stands with no wheels or suspension on atm. Plus or minus 2mm max. It was with a measuring tape. Ill use a proper metal rule tonight
Gav

Thanks mate, its quiet critical as the new calipers are 54mm offset