Fitted New Cayenne Calipers on UrS6.

[Thuppu]

Wow, this is a nice mod. The calipers are enormous!

I have also a set of Brembos lying around and have ponder to do a similar mod to get rid of the UFO-brakes. They are also very big Range Rover Sport 4-pot calipers and would need 30x340-360mm size disc. I would have to change my winter wheels from 16" -> 18"...

[s2_bo]

so how much do you want for them then?

[quattrostyle]

well onfortunately I don't own an UrS4/S6 and the calippers are way too big for my type 85

[popdemonic]

Well i will have some photos of 18ZR calipers on Urs4 with HP2 struts.the car is belong to the friend of mine.He was using multi piece 360mmX34mm Discs.will try to post ASAP.

[popdemonic]

the 18 ZL are the ones I got, what should the difference be?

for 17ZR,ZL calipers you would need 330mm Rotors with some slightly grinding job on the mounting bolts,18ZR has slightly longer on the bracket for the bigger rotor,i think it would need 350mm rotor discs.Anyway,everything needs to try out. you might try to mount the calipers with pads on the struts and measuring what's the size of the rotors they required.This method is straightforward and least error in this case.you just measure them from the center of the hub to the outer side of the brake pads.
now you will have radius value and then multiply by 2.you will have the rotor size on your hand now.

[quattrostyle]

part# 955 351 421/422-70 for the calipers.Personally,you might fit the generic 18ZR/ZL red cayenne calipers on these HP2 strut too.

the 18 ZL are the ones I got, what should the difference be?

[S6Sputnik]

Very nice..brilliant really!

[popdemonic]

part# 955 351 421/422-70 for the calipers.Personally,you might fit the generic 18ZR/ZL red cayenne calipers on these HP2 strut too.

[popdemonic]

The pistons size is 36mmX6 on the calipers.I have not had the rear calipers on my car yet because i'm looking
to the way to put the handbrake on.surprisingly,the i think this calipers had ended up with better brake bias compared to stock HP2 calipers.

[Big Lee M]

Wow, on the last picture the car looks amazing. I love the BBS LM's they suit the car. I bet it stops on a button.

[s2_wot]

part numbers

they should be the red ones listed at the bottom of the page on this link:

http://www.teile.pl/katalog/Porsche_parts_Porsche_Cayenne/6/Wheels_brakes/602_Disk_brake_front_axle/30/

Looks like amazing stopping power

[s2_bo]

you want to let me have them then??

[URSIMPO]

Wow

[s2_bo]

Would you mind posting the caliper part numbers

[quattrostyle]

that looks great, and I bet the stopping power is great too.

I got a set of these calipers that are no use to me...