Yet another 996 314mm upgrade

[tscheel]

Hi.

My 80 2,3 20V Avant was sold yesterday, and before the missus gets her filthy hands on the money, I started power shopping for brake parts for the unstoppable S2. I'm copying this upgrade : http://www.s2forum.com/forum/showpos...&postcount=156

I started the shopping here : http://www.ebay.de/itm/320753691104 and then a pair of Bambridges slimline brackets was ordered.

Next up - dust seals, disks, pads and hardlines. Any pic's of modified hardlines with this or similar upgrade?

Dust seals from here I think : http://www.porschecalipers.co.uk/shop/dustseals/ What size do I need for the 996.351.425?

I'm looking into splash plates soon - I think I would like them to be there.

[205gti]

Where did you get the brackets from?

[nesshead6]

Where did you get the brackets from?

The brackets are available from user bambridge on here. I've just fitted my calipers and they work perfectly with 314mm disc and fit under standard 16" wheel.

Any pic's of modified hardlines with this or similar upgrade?

For the brake lines I just used an L shaped piece of copper brake pipe at the end of the standard flexi. It's tricky to make the flare at the end of such a short pipe though, most decent flaring tools require the pipe to be a certain minimum length.. I borrowed one from a garage Didn't take pictures unfortunately...

[bambridge]

caliper brackets

Where did you get the brackets from?

The Black Anodised Brackets is for the S2, the Natural Finished Bracket is for the Ur

[tscheel]

The Black Anodised Brackets is for the S2, the Natural Finished Bracket is for the Ur

Beauties! Looking forward to seeing them in the flesh

[robo]

The Black Anodised Brackets is for the S2, the Natural Finished Bracket is for the Ur

Is the ur bracket from Darren for 996 caliper and sq disc?
What is the price for both brackets?
thx

[tscheel]

Brakelines - could I get away with buying a set like these :

http://www.porschecalipers.co.uk/shop/brakelines/mk5/

or

http://www.porschecalipers.co.uk/shop/brakelines/mk4/

?

I dig the thought of a bolt on conversion

One supplyer for pads, lines and dust seal wouldn't hurt either.

[bambridge]

Is the ur bracket from Darren for 996 caliper and sq disc?
What is the price for both brackets?
thx

No mate, the ur bracket is for the 986 Caliper and 285apec disc(will smyth)?? designed this one.
I only made 2 sets from Darrens Drg, Will@VRS had 1 set and the other is for Steve Browns Sport Rep Project!!

Price for these are £115-00 delivered in Uk, bit more for Europe/ROW

All brackets are Hard Black Anodised and come with new High Tensile Bolts (12.9) x8

Cheers

Kev

[robo]

.
I only made 2 sets from Darrens Drg,
Kev

Kev would you be able to do one pair for me in the future?
thx

[Jonas_R]

You could just buy the RS2 hardlines instead. They just need a slight bend to work and they are cheap. I just them for my conversion.

[tscheel]

You could just buy the RS2 hardlines instead. They just need a slight bend to work and they are cheap. I just them for my conversion.

Bingo - thank's for the tip. AZF to the rescue. Any ideas for a reasonable source for brembo 314*30 discs?

[Jonas_R]

You could try AZF as well, when I did my conversion I got some Zimmerman 323x30 dics for a really nice price.

Or you could email "Blondie" on audiclub.dk and ask him, I think he bough some Brembo disc cheap for his Audi S6 Plus from a Uk site.

[newsh]

I bought Brembo A8 discs off the bay of fleas recently, lots on there. Good friction from the Brembos in comparison to the GSF discs I bought last time..

[TimE-J]

I've gone for brembo a8 discs as well off eBay from GSF.

[bambridge]

Kev would you be able to do one pair for me in the future?
thx

Yes mate!!! gonna do another S2/996 batch soon, so will do another set of Darrens set for you