Yet another 996 314mm upgrade

[robo]

Yes mate!!! gonna do another S2/996 batch soon, so will do another set of Darrens set for you

thanks

[vertigone]

calippers bracket

Bambridge did you get my pm ?

[tscheel]

Prices arrived from Audi Zentrum Flensburg

2 * RS2 hardlines - 42,50 euro. Fair enough - its original RS2 copper
2 * 441 615 301 AA discs - 245,30 euro. A bit steep, me thinks.

[tscheel]

Prices arrived from Audi Zentrum Flensburg

2 * RS2 hardlines - 42,50 euro. Fair enough - its original RS2 copper
2 * 441 615 301 AA discs - 245,30 euro. A bit steep, me thinks.

2 Zimmermann 100.1231.50 ordered from ebay - ~160 euro.

I'm a bit confused about the pads - Ferodo frp3051 should fit, but I'm thinking redstuff (road use only). Dealers sort by car, and I'm not sure exactly which Porsches the 996.351.425 was fitted on. Mostly it's a different pads for different years problem. I have tried a little reverse engineering from the frp3051, but I'm not totally convinced about the right redstuff pads. Anyone?

[tscheel]

Beauties! Looking forward to seeing them in the flesh

Got them today - very nice!
calipers arrived yesterday. one dustseal was toast, piston was perfect :-)

[tscheel]

All parts have arrived. I'm not sure about shortening the calliper pins - if it it necessary, and how to. I guess a file wont cut it?

[Jonas_R]

I used a angle grinder to remove material from the pins

[tscheel]

Project concluded - nice, simple, bolt on solution - thank's to Bambridge's precision work. The Blue Van is officially not unstoppable any more. This forum

I removed 1mm from each of the inside pins with the angle grinder, not much more to say - it's a walk in the park (when you have access to an vacuum bleeder).

Total pricetag - 1000 euro, including a lot of shipping. Not too bad, considering that only the calipers are used (and in very good condition), everything else is new.

Can I fit the G60's on the rear end?