Porsche Cayenne caliper in Audi S2 obstruct

[[sTeeWie]]

Good afternoon,

I would like to alter saloon with pleasure the front brake with my S2.
In addition I have bought to myself the following components.

- Q7 calipers
- A8 brake discs 360 mm
- Q7 brake linings
- Adaptor for caliper

May one mount the saddle against the run direction?

To me it was said, it would not function properly if the brake disc calls only at the big piston.

Here in the forum the user audi-szwei the selbigen rebuilding has made and also has mounted the caliper against the run direction.
Unfortunately, he answers no PN.

[Nik0las]

where you found adaptors/carriers for the calipers?

[[sTeeWie]]

It builds to me a company here in Germany.
The adaptors are ready in 14 days.

[Nik0las]

do you have website of the company or phone?

How much they want for them?

[[sTeeWie]]

The whole one is built by the company http://vandit-performance.de/.

In 14 days I can pass(give) pictures and prices.

[s2_wot]

You can swap them around by switching the brake pipes and brake fluid bleeders.

So you put the left caliper on the right but also turn it upside down,

As the wheel turns it should pass the smaller piston first.

[mac2226]

A8 discs

Hi I'm fitting the 17zr-17zl calipers but can't find a suitable disc with a pad swept area of 60mm.Could you tell me if the a8 discs are the 360mmx32? If yes what pad swept area are the discs?

[[sTeeWie]]

Then I will mount the calipers in such a way that the brake disc calls only at the small piston.

It concerns 360x34mm brake discs of the S8.
Nevertheless, these fit only with the ZR18 & saddles ZL18.

[[sTeeWie]]

I have asked around sometimes.
And have found I both variations .
small piston first or big piston first.
According to company Tarox and Movit the small piston really does not deal what with him measure to the brake.
And according to 2 people who have obstructed the brake already in such a way that first the big piston is called by the brake disc there should be no problems.


have sometimes two pictures...

Below thus the big piston would be






Thus the big piston would be on top and also this downpour nose

[europeanme]

[macspring]

Spec's please, and photos of them when they're on the car. Thanks.

[fluk3]

Cayenne caliper

I made this set last year and ran with it all summer 2011 it worked perfectly :-)

Spec
Caliper porsche turbo
Disc audi a8 360x34
Adaptors spec made :-)

Rims 18" ultraleggera

[fluk3]

1 more picture :-)

[popdemonic]

recent photo i took on my car.Caliper lay under 18" LM's.

[europeanme]

Spec's please, and photos of them when they're on the car. Thanks.

will do.....

sorry for the slight hijack...