MAYBE a solution for handbrake with cayene 4pot rear caliper?

[orignalS60]

Any updates majorcina?

[Majorcina]

Shipping is super slow,still nothing arived...

[popdemonic]

oh real slow.

[Majorcina]

Teaser for you guys,untill i finish all

[Ruffiano]

are 22" wheels required for this setup? Sorry but this does not seem like a very elegant solution to me.

[Majorcina]

My wheels are 18'

[jade]

Teaser for you guys,untill i finish all

That plate looks very thin I imagine that will just bend

[diesel des]

Once the pads ware slightly then every time you pull this handbrake sytem in it will a gle the plates by pushing the pistons back in.

Sent from my HTC Desire HD A9191 using Tapatalk 2

[Majorcina]

Yeah thats what i toth,but i need to put spring also. Will see how it will work

[orignalS60]

Yes!!!

Wooh yes! Please keep us updated.

[Majorcina]

You guys need to consider that this is the simplest way to get the handbrake,for evrything else you need aditional caliper.
Also,the plate look very hard,so i doubt it will bent easy

[orignalS60]

Damn I just read you have 18 inch wheels.
Mine are 17" enkei rpf01.

[Thuppu]

This setup has worked well on another car with boxster 4-pot calipers and 18" wheels, and passed MOT. Majorcina will make more beta testing. Material is 2mm high strength 650 MC steel, could also be done in 3mm if there is room enough. We shall see how it works out... It's about 100 times more simpple solution than this.

[Ruffiano]

i could see it working as a parking brake, but wouldn't trust it as an emergency brake.

[Majorcina]

Well,i will test the power on MOT and on steam hill near my house.So we will know exacly how it work