Hello!
I'm having problems with getting sparks on my Audi S2 3B 1991.
For a while i got it started in the garage the first try, with the battery fully charged, but now for a while it has been totally dead, even with a fully charged battery. I'm suspecting the G40 in the distributor.
This was earlier in the spring when my garage was alot colder, and as you know now its summer and hotter.
I've ordered obd and cables to read out codes, but it has not arrived yet. Anyway, if the hall sensor is broken, i might want to change it.
I found this on autodoc:
https://m.autodoc.se/hitachi/3229382
Will this work or is it for 10v? I have seen that on 10v its 12 volts to the G40 and on my S2 3B it should be 5 Volts.
Thank you!
I'm having problems with getting sparks on my Audi S2 3B 1991.
For a while i got it started in the garage the first try, with the battery fully charged, but now for a while it has been totally dead, even with a fully charged battery. I'm suspecting the G40 in the distributor.
This was earlier in the spring when my garage was alot colder, and as you know now its summer and hotter.
I've ordered obd and cables to read out codes, but it has not arrived yet. Anyway, if the hall sensor is broken, i might want to change it.
I found this on autodoc:
https://m.autodoc.se/hitachi/3229382
Will this work or is it for 10v? I have seen that on 10v its 12 volts to the G40 and on my S2 3B it should be 5 Volts.
Thank you!
Comment