Paul:
Can you get the schematics for a 3B?
Can you get the schematics for a 3B?
-
They are the same for 3B, ABY, ADU and lots of other engines on the B3/B4 family.
Dunno if you saw the TDi threads today, but it would appear that the 1Z TDi engine had its own special treatment wrt cruise control as I think it must have been one of the 1st drive-by-wire ECUs from Audi and so cruise was done differently on those.
There is no interaction between ECU on S2 or RS2 with the cruise controller... And the wiring loom picks up on a standard connector location in the wiring loom. ELectrically this is pretty easy - I think the trickier bit is sourcing the right brackets and fixings for the vacuum servo which I understand are different per engine type to accomodate different throttle cable implementations.
PaulPaul Nugent
Webmaster http://S2central.net
Administrator http://S2forum.com
1994 S2 Coupe ABY - aka Project Lazarus
2001 A6 allroad 2.5TDi - family tank
2003 S4 Avant 4.2 V8 - daily burble
Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)
There are only 10 kinds of people that understand binary - those that do, and those that don't
Comment
-
Comment
-
Brilliant!!
These are exactly what I want!!!
Thanks so much!
JohnBJohn Bowlerwell
Electronic Engineer
Present:
Nogaro Blue RS2 - TOE
Previous:
Kingfisher Blue S2 - UAA
Volcano Black RS2 LHD - DEXComment
-
Comment
Comment